Removing the print media
When changing the print media from tube to label tape, or from label tape to tube, it is necessary to take out the media that is currently set in the printer. However, because the printer feeds tube or label tape into its transport rollers, it is not possible to simply pull out the current media. It is first necessary to perform the operation described below to release the tube or label tape that has been fed into the unit.
These operations are the same for heat shrink tube, wrap around tape, 4mm I.D. strip, and clear tube.
Even after the printing media has been removed, the printer will continue to operate.
-
Press [Remove].
|
|
-
Press [Enter].
After pressing [Enter], use the feed function if the tube or label is not released from the transport roller (unable to remove) even after the printer has stopped.
|
-
Open the cover.
|
|
-
(Tube only) Pull the tube out of the tube attachment.
|
|
-
Detach the tube attachment or the label tape cassette from the printer.
|
|
-
Close the cover.
|
|
-
Prepare to print.
|
|
|
 Confirm that the ribbon is not slacked.
Tighten the ribbon if the ribbon is slacked when removing the tube or label tape.
|
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________
