Adjusting the printing start position and vertical position
When printing, environmental factors or characteristics of the print media may cause printing to start slightly out of position or to be shifted slightly in the vertical direction so that character data is not printed correctly, even though the correct print media type and size are selected. In such case, you can shift the printing position slightly up / down or left / right.
The printing start position can be set independently for each print media.
Case 1
The character alignment is set to Left and the margin was set to 3mm. However, when actually printed, the margin is only 2mm.
Case 2
Printing is shifted up about 0.5mm.
ex. When printing on label tape (12mm wide), the phenomena described in case 1 and case 2 both occur simultaneously. Make the appropriate adjustments.
-
Press [Option].
|
|
-
Press or to select 1:Adjustment, then press Adjustment mode [Enter].
|
|
-
Press or to select 1: End portion, then press Select media [Enter].
|
|
-
Press or to select 4:label, then press [Enter].
|
|
-
Press four times; Right 1.0mm is displayed.
Press to move the printing start position to the left. The printing start position can be adjusted up to 2.5 mm to the left or right.
|
|
-
Press [Enter].
|
|
-
Press [Option].
|
|
-
Press or to select 1:Adjustment, then press Adjustment mode [Enter].
|
|
-
Press or to select 2:Height, then press [Enter].
|
|
-
Press or to select 4:Label, then press [Enter].
|
|
-
Press or to select 3:12mm, then press [Enter].
When the print media is a 4mm I.D. strip, and wrap around tape the size selection is skipped.
|
|
-
Press two times; Down 0.5mm is displayed.
Press to move the vertical position up.
|
|
-
Press [Enter].
|
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________