Half cuts and full cuts
If you examine a long tube that has been printed and fed through the machine, you will see notches between each segment. These notches allow you to break the individual tube segments apart by hand. The same is true for label tape. The notches make it easy to peel each label off. These notches are called Half cut. After the last tube or label tape, a complete cut is made. This is called a Full cut.
Turning off half cuts
Instead of making half cuts, you can print a cutting line. The cutting line can be either a solid line or a dotted line. It is also possible to print without either half cuts or cutting lines.
ex. Turn off half cuts and print a dotted cutting line.
-
Press [Option].
|
|
-
Press or to select 2:Print options, then press [Enter].
|
|
-
Press or to select 2:Half-cut, then press [Enter].
|
Initially, Yes is selected for the half-cut setting.
|
-
Press or to select 0:No and then press [Enter].
|
|
-
Press or to select 2:Dotted and then press [Enter].
|
|
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________