Printing count
The number of pieces to print can be specified from 1 to 10. For example, the following text has been entered to create three tubes.
ex. Print three tube segments (3.0 mm).
If 3 is set as the sets to print, tube segments are printed as shown below. In short, the three pages of character data are printed three times, resulting in a total of nine tube segments.
-
Press [Print / Print Option].
|
|
-
Press or to select Tube, then press [Enter].
|
|
-
Press or to select 2:3.0mm, then press [Enter].
|
|
-
Press [3] and [Enter].
The result of this operation is that the character data for three pages is printed three times.
|
|
-
Confirm the location of the leading end of the loaded tube, press or to select the appropriate input side, then press [Enter].
|
|
If the leading end of the loaded tube is at transport roller 2, select [IN], and if it is at the cutter side, select [OUT].
|
Canceling printing
If you press [Cance.], the message Aborting print appears and printing is aborted. In this case, the tube that is currently being printed is cut and then ejected.
|
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________