Message
|
Description
|
Action
|
Input value out of range.
|
An attempt was made to enter a valude that is outside of the settable range.
|
Delete some input data to free up some space.
|
Not enough memory.
Character input is no longer possible.
|
An attempt was made to enter characters when there was insufficient free space in memory.
|
Delete some input data to free up some space.
|
Length exceeded. Input data exceeds set length.
|
Entered character length exceeded the specified cut tube length.
|
Change the specified cut tube length.
|
Not enough memory.
Cannot save any more files.
|
An attempt was made to save a file while there was insufficient free space remaining.
|
Delete any unnecessary files to create free space.
|
No files.
|
An attempt was made to load or delete a file even though no files have been saved.
|
Save the file once more.
|
No media.
|
An attempt was made to print while no printing media has been loaded.
|
Load the print media and then press [Enter] to begin printing.
|
No Ribbon cassette.
|
An attempt was made to print while no ribbon cassette was installed.
|
Install a ribbon cassette.
|
End of media.
Pull out print media.
|
The end of the printing media was reached while printing was in progress.
|
Take out the printing media from the printer, and replace it with new printing media.
|
End of ribbon
Replace ribbon cassette.
|
The end of the ribbon cassette was reached while printing was in progress.
|
Install a new ribbon cassette, then press [Enter] to resume printing.
|
Start of media not detect.
Remove media between print head and cutter.
|
An operation was attempted while the printing media was not inserted properly.
A printing media is jammed between the print head and cutter.
|
Take out the printing media, reinstall it correctly, then press [Enter].
Remove the printing media between the print head and cutter, then press [Enter].
|
Cannot initialize print head position.
|
It is impossible to initialize the print head position for some reason.
|
Press [Enter]. If the same message appears again, contact your dealer.
|
Cannot move print head to print position.
|
It is impossible to move the print head to the printing position for some reason.
|
Press [Enter]. If the same message appears again, contact your dealer.
|
Cannot initialize cut position.
|
It is impossible to initialize the cutter position for some reason.
|
Press [Enter]. If the same message appears again, contact your dealer.
|
Close cover and press any key.
|
An operation was attempted while the cover was open.
|
Close the cover and press any key.
|
Media JAM
Enter / Cancel
|
Tube or label tape is jammed.
|
Remove the jammed object.
|
Printing...
Ribbon will end soon
|
Remaining ribbon is low when printing. (approximately 10m remaining)
|
Have a new ribbon cassette ready.
Replace with new ribbon cassette if printing a long document.
|
No ribbon information.
No ribbon amount displayed.
Press enter
|
The printer could not properly communicate with the ribbon cassette.
|
Follow the instructions on the screen.
|