Scan-from-Operation-Panel Settings Screen (macOS) - TR4720

Article ID: ART180467 | Date published: 10/12/2021 | Date last updated: 10/12/2021
 

Description

This article provides information on the Scan-from-Operation-Panel Settings screen found in IJ Scan Utility for macOS.

Solution

Scan-from-Operation-Panel Settings Screen

Besides the printer that IJ Scan Utility Lite is currently set to use, you can add and set a printer with which you want to scan from the printer's operation panel.

To display the Scan-from-Operation-Panel Settings screen, click Scan-from-Operation-Panel Settings in the Settings (General Settings) dialog.

Scanners

The Bonjour service names of the printers with which you can scan from the operation panel are displayed.
You can select up to two printers in total at the same time.

 If you have changed the Bonjour service name after selecting your printer by Bonjour service name, click (Refresh) in the Settings (General Settings) dialog, deselect the checkbox of the old Bonjour service name, and then select the new Bonjour service name.

 If the Bonjour service name of your printer does not appear or cannot be selected in the Scan-from-Operation-Panel Settings screen, check the following, click OK to close the screen, and then reopen it and try selecting again.

  • Network settings of your printer is completed.

  • (Refresh) in the Settings (General Settings) dialog has been clicked.

  • Network communication between your printer and computer is enabled.

Enables scanning from the operation panel

Select this checkbox to scan from the printer's operation panel.

Instructions

Opens this guide.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments