Ask a Question

Set up the PIXMA TS3320 for use via Wi-Fi - Windows (Standalone MP Drivers)

Article ID: ART180648 | Date published: 03/10/2022 | Date last updated: 03/10/2022
 

Description

This article will show you how to install the drivers for the PIXMA TS3320 on a Windows PC so that it can be used wirelessly.

Solution

Before Starting

The printer must be connected to your wireless network before installing these drivers. If the printer has not been connected to the network, there are a few different ways you can connect the printer wirelessly:

After connecting the printer to the wireless router, follow the steps below.

  1. Click here.

  2. Click Select to the right of the TS3300 series MP Drivers.

    Click Select

  3. Click Download.

    Click Download (outlined in red)

  4. Save the file to your computer, then open it. If prompted to provide permission, click Allow or the appropriate affirmative option.

  5. Click Next.

    Click Next (outlined in red)

  6. Select your place of residence, then click Next.

    Click Next (outlined in red)

  7. Read through the License Agreement.  Click Yes to proceed.  If you click No, the installation will not proceed.

    Click Yes (outlined in red) to proceed

    The MP Drivers will be installed. This may take several minutes.

    Installing

  8. On the Connection Method screen, select Use the printer with Wi-Fi connection and click Next.

    Select Use the printer with Wi-Fi connection, then click Next (outlined in red)

  9. Select Next.

    Select Next (outlined in red)

  10. Make sure that Automatic search is selected, then click Next.

    With Automatic search selected, click Next (outlined in red)

    The computer will search for the printer on the network.

    The computer is searching for the printer

  11. Make sure that your printer is selected, then click Next.

    With your printer selected, click Next (outlined in red)

     If your printer is not detected, make sure that the computer has reconnected to the correct network. Also, you may need to temporarily disable any firewall software, or you may need to open blocked ports in the firewall. If your PC is connected to a VPN (Virtual Private Network), temporarily disconnect from the VPN and try the setup again.

  12. The drivers will be installed. When the following screen appears, click Complete.

    The setup has been completed

     If you have multiple printers installed on your computer and you want this one to be the default printer, leave a check in the box for Set as default printer. Remove this check if you don't want this printer as the default printer.

  13. You may be prompted to restart your computer.Click OK to restart, or Cancel if you don't want to restart.

    Click OK or Cancel (outlined in red)

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________

 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments