Set up the PIXMA MG3200 Series Printer for use via USB - Windows (Standalone MP Drivers)

Article ID: ART180652 | Date published: 03/15/2022 | Date last updated: 03/15/2022
 

Description

This article will show you how to install the drivers for the PIXMA MG3200 series printer on a Windows PC so that it can be used via USB.

Solution

The PIXMA MG3220 can be set up for use via USB using the MP Drivers available on the Canon USA website. To use the MP Drivers to set up your printer use via USB, follow the steps below.

  1. Click here.

  2. Click Select to the right of the MG3220 series MP Drivers.

    Click Select

  3. Click Download.

    Click Download

  4. Save the file to your computer, then open it. If prompted to provide permission, click Allow or the appropriate affirmative option.

  5. Click Next.

    Click Next (outlined in red)

  6. Select your place of residence, then click Next.

    Click Next (outlined in red)

  7. Read through the License Agreement.  Click Yes to proceed.  If you click No, the installation will not proceed.

    Click Yes (outlined in red) to proceed

    The MP Drivers will be installed. This may take several minutes.

  8. On the Connection Method screen, select Use the printer via USB and click Next.

    Select Use the printer via USB, then click Next (outlined in red)

  9. Connect a USB cable to the printer and the computer.

    Connect a USB cable to the printer and the computer

  10. When the following screen appears, click Complete.

    The setup has been completed

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments