Main Components of the Printer (Front View) - GX5020

Article ID: ART180684 | Date published: 04/12/2022 | Date last updated: 04/26/2022


This article provides information on the components found on the MAXIFY GX5020 when viewing it from the front.


Front View

View from the front of the printer. To the rear of the printer are the paper support (A) and the rear tray cover (B). Inside the rear tray cover are the rear tray (C) and the paper guides (D). At the base of the printer is the cassette (F). Inside the cassette are the paper guides (E). Above the cassette is the paper output tray (G). On the front left of the printer is the operation panel (H).

A: Paper Support

Extend to load paper in the rear tray.

B: Rear Tray Cover

Open to load paper in the rear tray.

C: Rear Tray

Load paper or envelopes here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.

D: Paper Guides

Align with both sides of the paper stack.

E: Paper Guides

Align with right/left/front sides of the paper stack.

F: Cassette

Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.

G: Paper Output Tray

Printed paper is ejected. Pull out it before printing.

H: Operation Panel

Use to change the settings of the printer or to operate it.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments