Ink Level Monitor - GX5020

Article ID: ART180771 | Date published: 05/12/2022 | Date last updated: 05/12/2022
 

Description

Learn how to reset the ink level monitor of the MAXIFY GX5020. This should be done after refilling an ink tank.

Solution

Ink level monitor

Press the Setup  button, then press the Right arrow button until Ink level monitor appears. Then, press the OK button.

Figure: LCD

 The administrator password may be required to change the settings.

Reset ink lev. count will appear on the LCD. Press the OK button.

This will resets the remaining ink count.

If you select Yes, you can reset the remaining ink count of all the ink tanks at once.

If you select No, you can specify the ink color and reset the remaining ink count in any ink tank.

 After refilling the ink to the upper limit line of the ink tank, reset the remaining ink count. If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be detected properly.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments