Adjust the ECO Settings - GX5020
Article ID: ART180775 | Date published: 05/24/2022 | Date last updated: 05/24/2022
 

Description

Learn how to adjust the auto power settings of the MAXIFY GX5020 from its operation panel.

Solution

ECO settings

This setting allows you to turn on/off the printer automatically to save electricity.

 The administrator password may be required to change the settings.
 

Turning off Printer Automatically

You can enable the printer to turn off automatically when no operation is made or no printing data is sent to the printer for a specified period of time.

  1. Make sure that the printer is powered on.

  2. Press the Setup  button.

    The Setup menu screen is displayed.

  3. Use the Left arrow Right arrow buttons to select ECO settings and then press the OK button.

  4. Use the Left arrow Right arrow buttons to select EnergySaveSettings and then press the OK button.

  5. Use the Left arrow Right arrow buttons to select Auto power off and then press the OK button.

  6. Select a time to turn off the printer and then press the OK button.

 

Turning on Printer Automatically

You can enable the printer to turn on automatically when printing data is sent to the printer.

  1. Make sure that the printer is powered on.
  2. Press the Setup  button.

    The Setup menu screen is displayed.

  3. Use the Left arrow Right arrow buttons to select ECO settings and then press the OK button.

  4. Use the Left arrow Right arrow buttons to select EnergySaveSettings and then press the OK button.

  5. Use the Left arrow Right arrow buttons to select Auto power on and then press the OK button.

  6. Use the Left arrow Right arrow buttons to select ON and then press the OK button.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum