Main Components of the Printer (Front View) - TR7020
Article ID: ART180890 | Date published: 09/13/2022 | Date last updated: 09/13/2022


This article shows the parts found on the front of the PIXMA TR7020.


Front View

Figure: Front view of printer

A: Paper Support

Extend to load paper in the rear tray.

B: Rear Tray Cover

Open to load paper in the rear tray.

C: Paper Guides

Align with both sides of the paper stack.

D: Feed Slot Cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

E: Rear Tray

Load paper or envelopes here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.

F: Cassette

Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.

G: Paper Guides

Align with right / left / front sides of the paper stack.

H: Paper Output Tray

Printed paper is ejected. Pull out it before printing.

I: Paper Output Support

Open to support ejected paper.

Figure: Front view of printer with Automatic Document Feeder (ADF) open

J: ADF (Auto Document Feeder)

Load a document here. The documents loaded in the document tray are scanned automatically one sheet at a time.

K: Document Feeder Cover

Open when clearing jammed documents.

L: Document Tray

Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.

M: Document Output Slot

Documents scanned from the ADF are delivered here.

N: Operation Panel

Use to change the settings of the printer or to operate it.

O: ON button

Turns the power on or off. Before turning on the power, make sure that the document cover is closed.

P: Alarm lamp

Lights or flashes when an error occurs.

Q: Status Bar

Lights or flashes to indicate the printer is operating or when an error occurs.

R: Document Guide

Adjust this guide to match the width of document in the ADF.

Figure: Front view of printer with document cover open

S: Document Cover

Open to load an original on the platen.

T: Platen

Load an original here.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum