| Article ID: ART180923 | | | Date published: 09/22/2022 | | | Date last updated: 10/04/2022 |
Description
This article shows the technical specifications of the SELPHY CP1500.
Solution
Printing Method
Printing method
Dye-sublimation thermal transfer
Printing resolution
300×300 dpi
Gradation
256 shades per color
Color Ink / Paper Set
Color ink
Yellow, magenta, cyan
With overcoating
Paper size
Postcard size
| Paper specifications | Paper size | |
|---|---|---|
| Before separated at perforations | After separated at perforations | |
| Photo paper | 100.0×177.0 mm (3.94×6.97 in.) |
100.0×148.0 mm (3.94×5.83 in.) |
L size
| Paper specifications | Paper size | |
|---|---|---|
| Before separated at perforations | After separated at perforations | |
| Photo paper | 89.0×148.0 mm (3.50×5.83 in.) |
89.0×119.0 mm (3.50×4.69 in.) |
Card size
| Paper specifications | Paper size | Label sheet size | |
|---|---|---|---|
| Before separated at perforations | After separated at perforations | ||
| Photo paper | 83.0×86.0 mm (3.27×3.39 in.) |
54.0×86.0 mm (2.13×3.39 in.) |
|
|
Full-size label Entire surface is a label |
54.0×86.0 mm (2.13×3.39 in.) |
||
|
Label 8-label sheet |
22.0×17.3 mm (0.87×0.68 in.) |
||
| Square label | 54.0×54.0 mm (2.13×2.13 in.) |
||
Printing Speed
(Approx. time, in sec.)
| Print finish | Postcard size | L size | Card size |
|---|---|---|---|
| Glossy | 41 | 35 | 23 |
| Semi-gloss/Satin | 56 | 47 | 30 |
Measurement conditions: Room temperature, from the initial yellow printing pass until ejection
Monitor
Type
TFT LCD color monitor
Screen size
3.5-inch (aspect ratio of 3:2)
External Interface
Card slot
Insertion
| Direct insertion | SD, SDHC, SDXC memory cards |
| With adapter | miniSD, miniSDHC, microSD, microSDHC, microSDXC memory cards |
UHS-II is not supported.
Applications
Printing from memory cards
Digital terminal
Terminal type
USB Type-C
Transmission
USB 2.0
Applications / connection method
| Applications | Connection method | |
|---|---|---|
| For computer communication |
IFC-100U Commercially available USB cables should not exceed 2.5 m (8.2 ft.) |
|
| For printing from USB flash drives | USB flash drives | FAT / exFAT format only |
| USB charging/power supply | Not provided | |
Power Source
External power source
Compact Power Adapter CA-CP300 B
Battery pack
NB-CP2LI, NB-CP2LH
Power consumption
| Printing | 60 W or less |
| Standby | 4 W or less |
Compact Power Adapter CA-CP300 B
| Rated input | 100–240 V AC (50/60 Hz), 0.88 A (100 V)–0.43 A (240 V) |
| Rated output | 24 V DC, 1.8 A |
| Operating temperature | 0–40°C (32–104°F) |
Battery Pack NB-CP2LH (sold separately)
| Type | Rechargeable lithium-ion battery |
| Nominal voltage | 22.2 V DC |
| Nominal capacity | 1290 mAh |
| Charging cycles | Approx. 300 times |
| Operating temperature | 5–40°C (41–104°F) |
Battery Pack NB-CP2LI (sold separately)
| Type | Rechargeable lithium-ion battery |
| Nominal voltage | 21.6 V DC |
| Nominal capacity | 1900 mAh |
| Charging cycles | Approx. 300 times |
| Operating temperature | 5–40°C (41–104°F) |
Dimensions and Weight
Dimensions
| Width × Height × Depth | 182.2×57.6×133.0 mm (7.17×2.27×5.24 in.) |
Including rubber soles
Weight
Approx. 850 g (Approx. 29.98 oz.)
Printer body only
Operating Environment
Operating temperature
5–40°C (41–104°F)
Operating humidity
20–80%
Wi-Fi
Specifications
Conforms to IEEE 802.11b/g
Frequency
2.4 GHz band
Channels
1 to 11 ch
Communication modes
| Communication mode | Simultaneous connections | Security protocol | |
|---|---|---|---|
| Connection via Wi-Fi rooter |
Access point connections Wi-Fi Protected Setup supported. |
Not supported when connected via Wi-Fi Protected Setup |
|
| Direct connection |
Printer serves as a basic access point for device connections Internet connection may not be available for some smartphones. |
8 |
Even with a smartphone that supports WPA3-SAE, connection may not be established depending on the OS version or using environment |
| Connect with SELPHY Photo Layout | Printer serves as a basic access point for connections to SELPHY Photo Layout | 1 |
Even with a smartphone that supports WPA3-SAE, connection may not be established depending on the OS version or using environment |
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________