Charging the Battery - IVY 2 Mini Photo Printer

Article ID: ART180932 | Date published: 10/13/2022 | Date last updated: 10/13/2022


This article provides information on charging the IVY 2 Mini Photo Printer.


Figure: Printer will charge when plugged into a chargeable USB adapter


Charging status LED


Charging (Red)

Fully Charged

Fully Charged (Green)

This printer uses a built-in battery. Before using the printer, fully charge the battery using the USB cable provided.

  1. Insert the smaller end (USB Type C) of the supplied USB cable into the pirnter and the other end (USB Type A) into a chargeable USB adapter.

  2. The charging LED light will turn red to indicate charging.

  3. Once fully charged, the charging LED will turn green.

     Operating time may vary depending on the battery status, operational status and environmental conditions.

About the USB Cable

Handle the USB cable with care while charging:‚Äč
  • Do not place any heavy objects on top of the cable.

  • Do not place the USB cable near heat.

  • Do not scratch, damage, twist, or pull hard on the cable.

  • Do not plug or unplug the cable with wet hands.

  • Avoid too high / too low temperatures or humid conditions.

  • Please unplug the USB cable from the power source after charging.

  • Please use the supplied USB cable for charging.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments