You can copy two original pages onto a single sheet of paper by reducing each image.
Select Settings in the Copy standby screen to display the print settings screen. Select 2-on-1 copy in for Layout and select OK.
If you select Advanced with 2-on-1 copy selected, you can specify the orientation and the order of the original.
- When you select Orientation: Portrait and Left to right:
- When you select Orientation: Portrait and Right to left:
- When you select Orientation: Landscape and Top to bottom:
- When you select Orientation: Landscape and Bottom to top:
After selecting the order, you can select whether you use the preview screen. If you select ON, the preview screen is displayed so that you can check the orientation.
If Cannot process because device memory is full. appears on the touch screen when scanning, set Print qlty to Standard and try copying again. If the problem is not resolved, set Print qlty to Economy and try copying again.
When checking orientation:
When you are using the preview screen, the preview screen is displayed before copying starts so that you can check the orientation.
-
Select to rotate the original by 180 degrees.
-
Select to start scanning the original.
-
Select to rescan the original.
When scanning is finished:
The confirmation screen appears after scanning the first sheet of original.
-
Select to start scanning the original.
Remove the sheet of original from the platen after scanning and load the next sheet on the platen and select Scan.
-
Select to start copying the original already scanned.
The printer starts scanning the second sheet of original and copying.
See how to add a copy job while printing (reserve copy).
You can copy four original pages onto a single sheet of paper by reducing each image.
Select Settings in the Copy standby screen to display the print settings screen. Select 4-on-1 copy for Layout and select OK.
If you select Advanced with 4-on-1 copy selected, you can specify the orientation and the order of the original.
- When you select Upper-left to right
- When you select Upper-right to left
- When you select Upper-left to bottom
- When you select Upper-right to bottom
After selecting the order, you can select whether you use the preview screen. If you select ON, the preview screen is displayed so that you can check the orientation.
If Cannot process because device memory is full. appears on the touch screen when scanning, set Print qlty to Standard and try copying again. If the problem is not resolved, set Print qlty to Economy and try copying again.
When checking orientation:
When you are using the preview screen, the preview screen is displayed before copying starts so that you can check the orientation.
-
Select to rotate the original by 180 degrees.
-
Select to start scanning the original.
-
Select to rescan the original.
When scanning is finished:
The confirmation screen appears after scanning the first sheet of original.
-
Select to start scanning the original.
Remove the sheet of original from the platen after scanning and load the next sheet on the platen and select Scan.
-
Select to start copying the original already scanned.
The printer starts scanning the second sheet of original and copying.
See how to add a copy job while printing (reserve copy).
When copying thick originals such as books, you can make a copy without black margins around the image and gutter shadows.
Select Settings in the copy standby screen to display the print setting screen. Select Frame erase copy and select ON.
Close the document cover.
There may be a narrow black margin that appears around the image. This function removes the dark margins only. If a scanned book is too thin or when the printer is used near a window or in a bright environment, a faint black frame may remain. Also, if the color of an original is dark, the printer cannot distinguish the document color from the shadow and this may cause slight cropping or a shadow on the crease.
You can copy two-sided of a card sized original such as an ID card onto a single sheet of paper consecutively.
Select Settings in the copy standby screen to display the print setting screen. Select ID card copy and select ON.
Check message that is displayed and select OK.
Pressing the Color 
button or Black 
button displays the confirmation screen.
Load the original on the platen (scanner glass) following the on-screen instructions and select Scan. When the front side has been scanned, the confirmation screen appears.
Load the original on the platen following the on-screen instructions and select Scan.
The printer starts copying.
Remove the original on the platen after copying is complete.
Using the Preview Screen to Check the Printing Result of the Front Side
Selecting Preview in the print setting screen displays how to load the original. Loading the original following the on-screen instructions and selecting Scan displays the preview screen to check the printing result of the front side.
Selecting OK on the preview screen returns to print settings screen.
Pressing the Color button or Black starts scanning the front side.
