Canon Knowledge Base - Summary of Reports and Lists

Report or List	Description
ACTIVITY REPORT	Shows recent fax transactions at sight. You can print an ACTIVITY REPORT manually. Information can be found under the Printing Report or List section. The * (asterisk) is appended to the history already printed on the ACTIVITY REPORT. If you select Print for Activity report in Auto print settings under Fax settings, the printer prints ACTIVITY REPORT for the last 20 sent and received faxes automatically.
Directory list RECIPIENT TELEPHONE NUMBER LIST GROUP DIAL TELEPHONE NO. LIST	Lists the numbers and names registered. You can print the lists of the recipients and group dials. Information can be found under the Printing Report or List section.
USER'S DATA LIST	Lists the current settings of the printer and the registered sender information. Information can be found under the Printing Report or List section.
MEMORY LIST	Lists the documents currently stored in the printer's memory. Information can be found under the Printing Report or List section. After selecting Memory reference to display the Memory list screen, you can print a MEMORY LIST by selecting Print doc. list.
REJECTED NUMBER LIST	Lists the rejected numbers. Information can be found under the Printing Report or List section.
CALLER HISTORY	Lists the caller history. This list is available when Caller ID service is subscribed. Information can be found under the Printing Report or List section. This list may not be supported depending on the country or region.
TX REPORT/ERROR TX REPORT	Either of these reports is printed after each fax transmission. By default, ERROR TX REPORT is set to be printed only when a transmission error occurred. You can set the printer to print TX REPORT each time it sends a document, or disable printing of the report by selecting TX report in Auto print settings under Fax settings. You can also specify the print setting so that the first page of the fax is printed along with the report. The first page of the fax is not printed in color transmission. MULTI TRANSMISSION REPORT is printed after sequential broadcasting of a document. If an error occurs when you send a fax, the error number is printed on ERROR TX REPORT (there are some errors for which the cause is also printed). Information can be found under the Errors When You Send a Fax section.
MULTI TRANSMISSION REPORT	This report is printed after sequential broadcasting of a document. Confirms whether the transmission to all the recipients has been completed successfully. The procedure to print and the error number is same as TX REPORT.
RX REPORT	This report is printed after each fax reception. By default, the printer is set so that RX REPORT is not printed at all. You can set the printer to print RX REPORT each time it receives a document, or only when an error occurs by selecting RX report in Auto print settings under Fax settings. If an error occurs when you receive a fax, the error number is printed on RX REPORT (there are some errors for which the cause is also printed). Information can be found under the Errors When You Send a Fax section.

This section describes the procedure to print a report or list manually.

You can print the following reports or lists manually.

ACTIVITY REPORT
Directory list (RECIPIENT TELEPHONE NUMBER LIST/GROUP DIAL TELEPHONE NO. LIST)
USER'S DATA LIST
MEMORY LIST
REJECTED NUMBER LIST
CALLER HISTORY

Make sure that the printer is powered on.
Load paper in the cassette or the rear tray.
Select Fax on the HOME screen.
The Fax standby screen is displayed.
Select Function list.
The Function list screen is displayed.
Select Print reports/lists.
Select a report or a list you want to print to start printing.
- When you select Directory list:
  Select Recipient or Group dial.
  
  If you select Recipient, select whether to print the RECIPIENT TELEPHONE NUMBER LIST in alphabetical order. If you select Yes, the printer prints RECIPIENT TELEPHONE NUMBER LIST in alphabetical order. If you select No, the printer prints RECIPIENT TELEPHONE NUMBER LIST in numerical order.
  
  If you select Group dial, the confirmation screen is displayed. Select Yes. The printer prints the GROUP DIAL TELEPHONE NO. LIST.
- When you select an item other than Directory list:
  Select Yes when the confirmation screen is displayed.
  
  The printer prints the selected report or list.

If an error occurs when you send a fax, the error number is printed on ERROR TX REPORT or ACTIVITY REPORT (there are some errors for which the cause is also printed).

The causes corresponding to the error numbers are as follows.

No.	Cause	Action
#001	Document is jammed in the ADF.	The document is jammed in the ADF (Auto Document Feeder). When the error is cleared, redo the operation.
#003	Document is too long.	You attempted to send a document longer than 15.75 in. (400 mm). "#003" is also printed if it takes time to send a page. Divide the document or set the image quality (Fax resolution) to a lower setting, then resend it.
#005	No answer.	The recipient's fax device does not respond. Contact the recipient and have the recipient check that the telephone line is connected correctly.
#012	No paper is in the recipient's fax device.	There is no paper in the recipient's fax device. Contact the recipient and have the recipient load paper.
#017	No tone is detected.	The printer could not detect the dial tone. Dial tone detect in Advanced fax settings under Fax settings is set to ON. Set to OFF.
#018	Line was busy.	The fax / telephone number you dialed is busy. Try dialing again after waiting for a moment.
#022	Number is deleted.	The fax / telephone number registered in the printer's directory is incorrect. Check the recipient's fax / telephone number, correct the fax / telephone number registered in the printer's directory, then send the document again.
#037	Memory is full.	The printer could not send a fax because its memory is full. Delete contents in memory, then send a fax again.
#059	Transmission has been canceled due to a fax information mismatch.	Transmission has been canceled because the printer could not detect the recipient's fax device information or the information did not match the dialed number. This message is displayed when Check RX fax information in Security control under Fax settings is set to ON.
#085	Try again in black & white transmission.	The recipient's fax device is not color-compatible. Resend the document in black & white.
#099	The Stop button was pressed during transmission.	The Stop button was pressed to cancel transmission of the document. Resend it if necessary.
#412	The fax could not be sent from the computer.	The fax could not be sent from the computer. Ensure that the printer is connected with the computer correctly and redo operation.
#995	The unsent fax was deleted while automatic redialing.	While automatic redialing, the unsent fax is stored in the printer's memory temporarily until the sending fax is complete. The fax stored in the memory of a printer was deleted before transmission by auto redial is completed. Resend the document.
#997	The printer was turned off during fax transmission.	The printer was turned off during fax transmission. Resend the document.

If an error occurs when you receive a fax, the error number is printed on RX REPORT or ACTIVITY REPORT (there are some errors for which the cause is also printed).

The causes corresponding to the error numbers are as follows.

No.	Cause	Action
#003	It takes too long to receive a page.	Contact the sender and have the sender divide the fax or set the image quality (Fax resolution) to a lower setting and resend it.
#005	No answer.	When receiving a fax manually, the printer could not detect the signals from the sender's fax device. Contact the sender and have the sender resend it, or set the printer to receive the fax automatically.
#037	Memory is full.	The printer could not receive a fax because its memory is full. Delete contents in memory, then ask the sender to resend the fax.
#046	Reception has been rejected due to the specified fax rejection condition.	Reception has been rejected because the fax matches the fax rejection condition specified by Fax reception reject in Security control under Fax settings.
#099	The Stop button was pressed during reception.	The Stop button was pressed to cancel reception of the fax. Contact the sender and have the sender resend it if necessary.
#995	The received fax was deleted.	The received fax was deleted before it is printed or forwarded to the shared folder of a computer. Contact the sender and have the sender resend it if necessary.
#997	The printer was turned off during fax reception.	The printer was turned off during fax reception. Contact the sender and have the sender resend it if necessary.

Models related to this article

Summary of Reports and Lists - GX4020

Description

Solution

Ask a Question