Make a Copy - GX3020

Article ID: ART181090 | Date published: 12/08/2022 | Date last updated: 02/28/2023


This article provides information on making basic copies with the MAXIFY GX3020.


Before Starting

 By default, the printer specifies the rear tray as the feed source for making copies. Information for changing copy settings can be found here.

Making Copies

This article describes the basic procedure to perform standard copying.

  1. Make sure that the printer is powered on.

  2. Load paper in the rear tray, cassette, or the rear flat tray.

  3. Select Copy on the HOME screen.

    The Copy standby screen is displayed.

  4. Load the original item on the platen (scanner glass).

  5. Specify the number of copies using the Up Down buttons.

    Figure: LCD

  6. Specify settings as necessary.

    The print setting screen is displayed when you press the OK button.

    Print setting screen

  7. Press the Black  button or the Color  button.

    The printer starts copying.

    Remove the original on the platen after copying is complete.

     Do not open the document cover or remove the original from the platen until scanning is completed.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments