Supported Paper / Media Sizes - TC-20 / TC-20M

Article ID: ART181192 | Date published: 01/12/2023 | Date last updated: 04/09/2024
 

Description

This article provides information on paper sizes supported by the imagePROGRAF TC-20 / TC-20M.

Solution

Rolls

Rolls that meet the following conditions are supported.

  • Outer diameter: within 4.4 in. (110 mm)

  • Inner diameter of paper core: 2 inches

  • Printing side out

Roll Paper Width

24 in Roll : 24.00 in. (609.6 mm)

A1 Roll : 23.39 in. (594.0 mm)

B2 Roll : 20.28 in. (515.0 mm)

18 in Roll : 18.00 in. (457.2 mm)

17 in Roll : 17.00 in. (431.8 mm)

A2 Roll : 16.54 in. (420.0 mm)

B3 Roll : 14.33 in. (364.0 mm)

A3 Roll : 11.69 in. (297.0 mm)

Minimum Paper Length

8.00 in. (203.2 mm)

Maximum Printable Length

13 feet (4 m)

Thickness

3 mil (0.08 mm) to 11 mil (0.28 mm)

 Information on specific supported papers can be found in our Large Format Media Guide.
 

Sheets

Sheets of the following sizes are supported.

Sheet Width

8.27 in. (210.0 mm) to 11.69 in. (297.0 mm)

Minimum Paper Length

8.00 in. (203.2 mm)

Maximum Printable Length

17.01 in. (432.0 mm)

Thickness

3 mil (0.08 mm) to 11 mil (0.28 mm)

 Learn about using non-standard paper sizes with a Windows PC or a Mac®.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments