If 1072 is displayed, follow the steps in the next section.
Open the top cover.
Check inside the printer.
If there is any paper left, remove it as follows.
Do not touch the clear film (A), white belt (B), or tubes (C).
If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.
If the jammed paper is under the print head holder, move the print head holder to the far right or left, whichever makes it easier to remove the paper.
When moving the print head holder, hold the print head holder and slide it slowly to the far right or left.
Hold the jammed paper firmly.
If the paper is rolled up, pull it out and grasp the edges of the paper.
Slowly pull out jammed paper so as not to tear it.
Pull out the paper at an angle of about 45 degrees.
Make sure all jammed paper is removed.
If the paper tears when you pull out it, a bit of paper may remain in the printer.Check the following and remove any remaining paper.
Any paper left under the print head holder?
Any small bits of paper left in the printer?
Any paper left in the left and right empty spaces (D) in the printer?
Gently close top the cover.
Check the computer screen.
If 1073 is displayed, follow the steps in the next section.
Load Card size paper in portrait orientation in the rear tray.
Align the paper guides of the rear tray with both edges of the paper.
Do not load the paper in the landscape orientation, as this may cause a paper jam.
Press the printer's OK button.
The printer resumes printing.Reprint the page you were printing if it was not printed properly due to the paper jam.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
Do not touch the clear film (A), white belt (B), or tubes (C).
