imagePROGRAF TC-20 USB Setup - Windows

Article ID: ART181274 | Date published: 01/26/2023 | Date last updated: 01/26/2023


This article shows how to set up your Windows PC to work with the imagePROGRAF TC-20 via a USB connection.


USB Setup - Windows

To be able to use your printer via USB on a Windows PC, you'll need to download the setup file for your computer.

Download and run the setup file.

Get the Setup File

After downloading the setup file, open it. If you're prompted to provide permission to open the file, select Open or the appropriate affirmative option.

  1. Select your language, then click OK.

    Select your language, then click OK (outlined in red)

  2. Select your place of residence, then click OK.

    Select your place of residence, then click OK (outlined in red)

  3. Select Start Setup.

    Click Start Setup (outlined in red)

    The installer will check for the latest information related to your printer.

    Checking the latest information

  4. Read the license agreement. Select Yes to proceed.  If you select No, the installation will not proceed.

    Click Yes (outlined in red) to proceed

  5. Select Agree or Do Not Agree to the information request.

    Click Agree or Do not agree (both outlined in red) to proceed

    This message appears if you selected Do not agree. Click OK to proceed.

    Click OK (outlined in red) to proceed

  6. After processing for a few moments, the installer will display the following message. Select Next.

    Click Next (outlined in red) to proceed

    The installer will search for the printer.

    Searching for printers

  7. On the Start Printer Connection screen, select USB Connection (USB Cable), then select Next.

    Select USB Connection (USB Cable), then click Next (outlined in red)

  8. Connect a USB cable to the back of the printer and to the computer.

    Connect the printer to the PC with a USB cable

    The connection is successful

  9. The installer will download the software and drivers. This may take several minutes.

    The software and drivers are downloading

    The printer will be registered into your computer. Please wait.

    Please wait

  10. After processing for a few moments, the following screen will appear. Select Next.

     If you have other printers installed on your computer and you want this printer to be the default, check the box for Set as default printer.

    Click Next (outlined in red) to proceed

  11. Select Go to Website. The installer will close.

    Click Go to Website (outlined in red) to close the installer

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments