Ink Level Monitor - G2270

Article ID: ART181309 | Date published: 01/31/2023 | Date last updated: 02/08/2023


Learn about toggling and resetting the ink level monitor of the PIXMA G2270.


Ink level monitor

Select this menu from Setup menu.

  • Ink notification

    Enables or disables the function which notifies the remaining ink.

     If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may prevent satisfactory print quality.

     When changing the remaining ink level notification function from disabled to enabled, it is necessary to refill all ink tanks up to the upper limit line.
  • Reset ink lev. count

    Resets the remaining ink count.

    If you select Yes, you can reset the remaining ink count of all the ink tanks at once.

    If you select No, you can specify the ink color and reset the remaining ink count in any ink tank.

     After refilling the ink to the upper limit line of the ink tank, reset the remaining ink count.

     If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be detected properly.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments