*The rating plate shows the manufacturer, model name, electrical
rating, and serial number.
Connector for tube warmer
Transport roller 2
Attachment / Media cassette mount
Transport roller 3
Media feed port (When the attachment is installed)
Connector for ribbon cassette
Display
Cutter
Ribbon cassette mount
Media delivery port
Transport roller 1
Blade receiver
Print head
Jam recovery lever
Size switch lever
Tube retainer lever
Cleaner
[Format] key
Sets the page / text input orientation and the text frame.
[Style] key
Specifies character size, number of lines, and space between
characters.
[Length / Margin key]
Specifies the length of one tube (or one label), character
alignment, and margins.
[Conti.] key
Sets up repeat printing of a page.
[Number.] key
Sets numbering for text.
[Regist.] key
Sets up the saving and loading of data.
[Symbol] key
Use this key to enter a symbol.
Use the [Shift] + [Enter] keys to confirm a selected unconfirmed symbol.
[Remove] key
This key is used to remove the tube or label tape from the printer.
[Option] key
All function can be set using this key.
[Delete] key
Deletes the currently entered characters and settings.
[Cancel] key
Press this key whlie printing to stop printing, and then stop after
cutting the print media. If you press and hold this key for 2 seconds or
more, the printer will stop without cutting.
If pressed during the operation of a function, the operation will be
canceled. Also, pressing this key while holding down [Shift] will return
you to the character input display.
[Back Space] key
Deletes the character to the left of the cursor position.
[Enter] key
Confirm the input of unconfirmed characters or selected items.
Pressing this key after finalizing text input will insert a page break
at the cursor position.
[]
[]
[]
[]
keys
Move the cursor or selected item up, down, left or right. If you
press this key while holding down [Shift] in the character input
display, you can move to the next or previous page.
[Print] key
Displays the printing preference display and allow syou to print the
currently displayed data.
Space key
Enter a space.
[Alt] key
This key is used to input characters with diacritical marks by
holding down this key while pressing the corresponding character key.
[Caps Lock] key
If you press this key and then enter alphanumberic characters, they
will be capitalized.
Caps Lock
Indicates whether the Caps Lock mode is active.
:
Active, so all alphabetic characters are entered in uppercase.
(No indication): Normal (inactive).
Print speed
Displays the printing speed settings.
H: High L: Low
Half cut setting
The settings for adding a half cut to tubes or label tapes are
indicated by the following symbols.
:
Half cut.
:
Not half cut, but a solid line is printed showing where to cut with
scissors, etc.
:
Not half cut, but a dotted line is printed showing where to cut with
scissors, etc.
(No indication): Not half cut, and no cutting line is printed.
Remaining Ink Ribbon
Indicates the remaining capacity of the ink ribbon with a mark.
(Ribbon
remaining): The display changes every 10%. When the remaining capacity
is low, prepare a new ribbon cassette.
(Out
of ribbon)
OR
(Not displayed) : The ribbon cassette is not loaded, or the
information cannot be read.
Power
The power source being used is indicated by the following symbols.
:
The AC adapter is being used.
(Power
remaining): When the battery is being used, the remaining battery charge
is indicated by this symbol.
(Out
of power): If the battery is not sufficiently charged, the remaining
capacity may not be displayed correctly.
Warmer
Displays the settings for the (optional) tube warmer.
Auto: Only
warms the tube during printing. When printing is executed, the tube will
be warmed up to the set temperature, and then printing will start.
RDY: Warms the tube except while printing. When printing is executed,
it starts printing immediately. "WAI" will be displayed when the set
temperature is adjusted.
OFF: Disable the tube warmer settings.
(No indication): The tube warmer is not set.
Cut Length / Alignment / Margin
Displays the settings for the length (cut length) of a tube (or a
label), alignment, and margin of the current page.
Cursor
Text is entered at the position indicated by a .
Cont Print
Displays the number of times the current page will be printed
repeatedly.
Character Space
Displays the character space setting for the current page.
Lines
Displays the number of lines setting for the current page.
Character Size
Displays the character size setting for the current page.
Frame
Displays the frame setting for the current page.
Orientation
Displays the print orientation and character orientation settings
for the current page.
Page
Displays the page number of the current page.
:
Displayed when there is a page before the current page.
:
Displayed when there is a page after the current page.
This
product treats the string of characters to be printed on one tube (or one label)
as one page. Press the [Enter] key to create a new page (Page Break).
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
]
[
]
[
]
[
]
keys
:
Active, so all alphabetic characters are entered in uppercase.
:
Half cut.
:
Not half cut, but a solid line is printed showing where to cut with
scissors, etc.
:
Not half cut, but a dotted line is printed showing where to cut with
scissors, etc.
(Ribbon
remaining): The display changes every 10%. When the remaining capacity
is low, prepare a new ribbon cassette.
(Out
of ribbon)
:
The AC adapter is being used.
(Power
remaining): When the battery is being used, the remaining battery charge
is indicated by this symbol.
(Out
of power): If the battery is not sufficiently charged, the remaining
capacity may not be displayed correctly.
.
This
product treats the string of characters to be printed on one tube (or one label)
as one page. Press the [Enter] key to create a new page (Page Break).