Canon Knowledge Base - Names of Components - MK3000

Names of Components - MK3000

Article ID: ART181544

|

Date published: 02/23/2023

|

Date last updated: 02/23/2023

Description

This article shows the components of the MK3000.

Solution

Select an option below for more information.


[Format] key	Sets the page / text input orientation and the text frame.
[Style] key	Specifies character size, number of lines, and space between characters.
[Length / Margin key]	Specifies the length of one tube (or one label), character alignment, and margins.
[Conti.] key	Sets up repeat printing of a page.
[Number.] key	Sets numbering for text.
[Regist.] key	Sets up the saving and loading of data.
[Symbol] key	Use this key to enter a symbol. Use the [Shift] + [Enter] keys to confirm a selected unconfirmed symbol.
[Remove] key	This key is used to remove the tube or label tape from the printer.
[Option] key	All function can be set using this key.
[Delete] key	Deletes the currently entered characters and settings.
[Cancel] key	Press this key whlie printing to stop printing, and then stop after cutting the print media. If you press and hold this key for 2 seconds or more, the printer will stop without cutting. If pressed during the operation of a function, the operation will be canceled. Also, pressing this key while holding down [Shift] will return you to the character input display.
[Back Space] key	Deletes the character to the left of the cursor position.
[Enter] key	Confirm the input of unconfirmed characters or selected items. Pressing this key after finalizing text input will insert a page break at the cursor position.
[] [] [] [] keys	Move the cursor or selected item up, down, left or right. If you press this key while holding down [Shift] in the character input display, you can move to the next or previous page.
[Print] key	Displays the printing preference display and allow syou to print the currently displayed data.
Space key	Enter a space.
[Alt] key	This key is used to input characters with diacritical marks by holding down this key while pressing the corresponding character key.
[Caps Lock] key	If you press this key and then enter alphanumberic characters, they will be capitalized.


Caps Lock	Indicates whether the Caps Lock mode is active. : Active, so all alphabetic characters are entered in uppercase. (No indication): Normal (inactive).
Print speed	Displays the printing speed settings. H: High L: Low
Half cut setting	The settings for adding a half cut to tubes or label tapes are indicated by the following symbols. : Half cut. : Not half cut, but a solid line is printed showing where to cut with scissors, etc. : Not half cut, but a dotted line is printed showing where to cut with scissors, etc. (No indication): Not half cut, and no cutting line is printed.
Remaining Ink Ribbon	Indicates the remaining capacity of the ink ribbon with a mark. (Ribbon remaining): The display changes every 10%. When the remaining capacity is low, prepare a new ribbon cassette. (Out of ribbon) OR (Not displayed) : The ribbon cassette is not loaded, or the information cannot be read.
Power	The power source being used is indicated by the following symbols. : The AC adapter is being used. (Power remaining): When the battery is being used, the remaining battery charge is indicated by this symbol. (Out of power): If the battery is not sufficiently charged, the remaining capacity may not be displayed correctly.
Warmer	Displays the settings for the (optional) tube warmer. Auto: Only warms the tube during printing. When printing is executed, the tube will be warmed up to the set temperature, and then printing will start. RDY: Warms the tube except while printing. When printing is executed, it starts printing immediately. "WAI" will be displayed when the set temperature is adjusted. OFF: Disable the tube warmer settings. (No indication): The tube warmer is not set.
Cut Length / Alignment / Margin	Displays the settings for the length (cut length) of a tube (or a label), alignment, and margin of the current page.
Cursor	Text is entered at the position indicated by a .
Cont Print	Displays the number of times the current page will be printed repeatedly.
Character Space	Displays the character space setting for the current page.
Lines	Displays the number of lines setting for the current page.
Character Size	Displays the character size setting for the current page.
Frame	Displays the frame setting for the current page.
Orientation	Displays the print orientation and character orientation settings for the current page.
Page	Displays the page number of the current page. : Displayed when there is a page before the current page. : Displayed when there is a page after the current page.

This product treats the string of characters to be printed on one tube (or one label) as one page. Press the [Enter] key to create a new page (Page Break).

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers: