Be sure to use the supplied genuine AC adapter and power cord.
- Connect the power cord to the AC adapter, and plug the AC adapter into the printer.
- Insert the power plug into a power outlet.
If the AC adapter jack is defective or damaged, it cannot be repaired. Please purchase the AC adapter from your point of purchase for this product.
If you are outdoors or in any other place where you do not have access to a power supply, you can use this printer with batteries.
Be sure to use fully charged eneloop AA Standard Model Batteries (BK-3MCCA). Do not use any other type of battery. Failure to do so may result in fire, malfunction, or injury.
- Prepare 6 eneloop AA Standard Model Batteries (BK-3MCCA) (Sold separately).
|
- Make sure that the power is turned off.
|
- Remove the battery cover.
|
|
- Insert the batteries.
- As shown in the figure, 1 insert the battery terminal into the printer, and 2 push it in.
- Pay attention to the direction in which you insert the batteries, as marked with the
 and  symbols.
|
|
- Put the battery cover back on.
- Push the battery cover in until it clicks into place, and close it completely so that there is no gap between the battery cover and the printer.
|
 |
If the product has batteries installed and the AC adapter is also plugged into a power outlet, the AC adapter will be given priority as the power supply. However, it is recommended that you remove the batteries when using the AC adapter, as they will be drained otherwise.
If the batteries are installed and the AC adapter is connected to the product, do not disconnect the AC adapter during printing. The product will not be able to print properly if you do so.
When printing using battery power, even if the AC adapter is connected during printing, the power supply will not be switched until printing is finished.
The remaining battery power cannot be displayed correctly directly after switching the power supply from the AC adapter to the batteries. Once printing starts, the remaining capacity will be updated.
When using the (optional) tube warmer or when printing large characters (character size: 6mm full-width), the batteries will be drained quickly. In such cases, we recommend the use of an AC adapter.
- Press and hold the power key for 1 second or more.
|
|
- When the power is turned on, the screen is switched in the order Startup display > Ribbon cassette information display > Character input display.
- If the power is turned on without a ribbon cassette loaded, the ribbon cassette information display will not be displayed.
|
Startup display
Ribbon cassette information display
Character input display
|
- If there is any data that was displayed when the power was last turned off (or automatically turned off), a screen will appear to confirm whether you would like to delete the data. If you press [Yes], the character input display will appear with the data erased.
|
|
You can choose not to display the screen to confirm the deletion of data upon startup. When set to No, the program will start without deleting the data being edited.
- Press the [Option] key.
|
|
- Use
 or  to select Others, then press the [Enter] key.
|
|
- Use or to select Init. DeleteCheck, then press the [Enter] key.
|
|
- Use or to select No, then press the [Enter] key.
|
|
- Press the [Shift] + [Cancel] keys.
- You will return to the character input display.
|
|
- Press and hold the power key for 1 second or more.
- The Shutting down... message wlil be displayed, then the printer will turn off.
|
|
- Unplug the power plug from the power outlet.
|
|
When disconnecting the AC adapter from the printer, be sure to remove the power plug from the power outlet first.
Do not disconnect the power plug until the power has been completely turned off.
If you will not be using the printer for a long period of time, remove the power cord, AC adapter, USB cable, and batteries from the printer.
