Ask a Question

How do I remove all onscreen displays and icons from the XA40 and XA45?

Article ID: ART181546 | Date published: 02/23/2023 | Date last updated: 02/23/2023
 

Description

Please refer to the following proceedure to remove all onscreen displays and icons on the XA40 and XA45.

Solution

Repeatedly pressing the DISP button will turn onscreen displays on/off in the following sequence:

Camera Mode:
  • All displays on
  • Onscreen markers1
  • Displays off

Media Mode2:
  • Only data code on
  • All displays on

1 The onscreen markers will be displayed on when MENU > [Display Setup] > [Onscreen markers] is set to an option other than [Off]. 
2 Pressing the DISP button has the same effect as touching the screen. During single photo view and while playing back a clip, the playback controls are displayed only momentarily.

When the "Displays off" selection is active, the camera will still display the red Rec icon and/or the black Stop icon during standby.

To remove all displays from external screens connected to the camcorder, set MENU > [Display Setup] > [Output Onscreen Displays] to [Off].

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments