| Originals |
Function |
How to Load |
| Magazines, Newspapers, and Documents |
Copying or Faxing |
Select the Loading the Original to Be Aligned with the alignment mark section for information |
| Scanning by detecting the type and size of the original automatically
If you scan using the operation panel, select Auto scan for document type in Scan. |
| Scanning by specifying a standard size (A4, Letter, etc.)
If you scan using the operation panel, select Document or Photo for
document type in Scan and specify a standard size (A4, Letter, etc.) for Scan size to scan originals. |
| Photos, Postcards, Business Cards, and Disc (BD / DVD / CD) |
Scanning only one originalIf you scan using the operation panel, follow the operation below.
- Select Auto scan for document type in Scan.
- Select Photo for document type in Scan and specify Auto scan for Scan
size to scan originals.
|
Select the Loading Only One Original in Center of the Platen section for information |
| Scanning two or more originals
If you scan using the operation panel, follow the operation below.
- Select Auto scan for document type in Scan.
- Select Photo for document type in Scan and specify Auto multi scan for Scan
size to scan two or more originals.
|
Select the Loading Two or More Originals on the Platen section for more information |
Place the original WITH THE SIDE TO SCAN FACING DOWN on the platen and align it with the alignment mark 
. Portions
placed on the diagonally striped area cannot be scanned.
The printer cannot
scan the striped area (A) (0.04 in. (1 mm) from the edges of the platen glass).
Place the original WITH THE SIDE TO SCAN FACING DOWN, with 0.40 in. (1 cm) or more space between the edges (diagonally striped area) of the platen. Portions
placed on the diagonally striped area cannot be scanned.
Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.40 in. (1 cm) or more space between the edges (diagonally striped area) of the platen and the originals, and between the
originals. Portions placed on the diagonally striped area cannot be scanned.
You can place up to 12 items.
- More than 0.40 in. (1 cm)
The
Skew Correction function automatically compensates for the originals placed at an angle of up to approximately 10 degrees. Slanted photos with a long edge of 7.1 in. (180 mm) or more cannot be corrected.
Non-rectangular
or irregular shaped photos (such as cut out photos) may not be scanned properly.
