Select this setting item from Device settings in Settings.

• Date / time settings

  Sets the current date and time.

• Date display format

  Selects the date display format.

• Daylight saving time settings

  Sets daylight saving time (summer time).

• Sound control

  Selects the volume.

  • Keypad sound
    Selects the beep volume when pressing the touch screen or the buttons on the operation panel.

  • Alarm sound
    Selects the alarm volume.

  • Line monitor sound
    Selects the line monitor volume.

  • Offhook alarm
    Selects the alarm volume when the phone receiver is not put on the hook properly.

• Key repeat

  Selecting ON lets you quickly display candidate numbers or characters by holding down the button during character entry.

• Original removal reminder

  Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen (scanner glass) after scanning.

   Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

• Wi-Fi pairing settings

  In order to connect Canon PRINT Inkjet / SELPHY, multiple configurations will be performed.

  • Enable / disable pairing
    Set the printer's Wi-Fi pairing function to enable or disable.

  • Allow / block additional pairing
    Permit or prohibit the addition of pairing with Canon PRINT Inkjet / SELPHY used in another device.

  • Delete paired devices
    Cancel all Canon PRINT Inkjet / SELPHY pairing.

• Ink level monitor

  • Reset ink lev. count
    Resets the remaining ink count.

     After refilling the ink to the upper limit line of the ink tank, reset the remaining ink count.

     If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be detected properly.

  • Ink notification
    Enables or disables the function which notifies the remaining ink.

     If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may prevent satisfactory print quality.

     When changing the remaining ink level notification function from disabled to enabled, it is necessary to refill all ink tanks up to the upper limit line.

• Fixed print quality

  Specifies print quality when printing on plain paper.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

____________________________________________________________________________________________