Placing folding documents on my DR-M1060 / DR-M1060 II Scanner
Article ID: ART181790
|
Date published: 03/28/2023
|
Date last updated: 03/28/2023
Description
Folio scanning allows you to scan documents that are larger than A3 and that do not fit in the feeder. To use the function, fold the document in half lengthwise and place into the feeder. The scanner will scan both sides and combine the scanned images into a single image. By using this function, in conjunction with Long Document mode, you can scan documents up to the A1 size.
Solution
Set the feed selection lever to the non separation feeding position (upper position).
Open the document feed tray.
Fold the document in half.
Crease the document firmly down its center to fold the document in half. Fold the document so that its edges are neatly aligned. If the document is not folded properly, paper jams may occur or distortions may appear in the combined scanned image.
Open the straight path tray when scanning cards. Scanning with the U-turn path may damage the card.
Place the document with the folded edge facing right.
After placing the document, align the document guides with both edges of the document.
Adjust the document guides to fit the width of the document. Otherwise, the image may scan as skewed or shifted.
The front side of the folded document will appear on the left side of the combined image.
The maximum size for the combined image is A1. When scanning a folded document of a a size other than the standard formats, set [Page Size] on the scanner driver settings screen to [Match original size].
