Reduce or Enlarge Copies on Cut Sheets - TC-20M
Article ID: ART181864 | Date published: 04/11/2023 | Date last updated: 04/11/2023


This artice provides detailed instructions on making copies on cut sheets with the imagePROGRAF TC-20M.


You can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.

  1. Load paper.

  2. Load original items on the Document Platen (scanner glass).

  3. Select Copy on the HOME screen.

     If both roll paper and cut sheets are loaded, a screen will appear asking which one to use. Select Copy to cut sheet.

  4. Select Standard copy.

  5. Select Settings.

  6. Select a magnification level in Magnif..

    Figure: Touch screen

    1. Flick to select the reduction / enlargement method.

    2. Select to display the screen below.

      Figure: Touch screen

      Select the numbers to specify the magnification.

  7. Select OK.

  8. On the Copy standby screen, specify settings as necessary.

    Figure: Copy standby screen

    1. The size and type of the loaded paper.

    2. Specify the number of copies.

      Specify the number of copies

      Select the numbers to specify the number of copies.

    3. The copy layout.

    4. Display the print setting items.

  9. Press the Black  button or the Color  button.

 To cancel copying, press the Stop  button.

 You can add a copying job while printing.

Reduction / enlargement Method

  • Fit to page

    The printer automatically reduces or enlarges the image to fit the page size.

    Fit to page example

    The setting in Magnif.: Fit to page

     When you select Fit to page, the page size may not be detected correctly depending on the original. In this case, select a setting other than Fit to page.

  • Preset ratio

    You can select one of the preset ratios to reduce or enlarge copies.

    Preset ratio example

    Select the appropriate ratio for size of original and page size.

     Some of the preset ratios are not available depending on the country or region of purchase.

  • Ratio specified copy

    You can specify the copy ratio as a percentage to reduce or enlarge copies.

    Ratio specified copy example

 400% MAX (maximum copy ratio) and 25% MIN (minimum copy ratio) are selectable.

 If you want to make a copy at the same size as the original, select Same size.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum