You can scan oversized originals in two halves and then print them onto a single sheet.

1. Load paper.

2. Select Copy on the HOME screen.

    If both roll paper and cut sheets are loaded, a screen will appear asking which one to use. Select Copy to cut sheet.

3. Select Image stitch copy.

4. Check the displayed message and select OK.

5. Select the size of the original.

6. Select the page size to print onto.

7. Load the top half of an original item on the Document Platen (scanner glass).

   

8. Check the displayed message and select OK.

9. On the Copy standby screen, specify settings as necessary.

   

   1. The size and type of the loaded paper.

   2. Specify the number of copies.

      

      Select the numbers to specify the number of copies.

   3. The copy layout.

   4. Display the print setting items.

10. Press the Black  button or the Color  button.

    The printer starts scanning of the first half of the original.

    When scanning of the original is finished, the printer beeps.

11. Rotate the oversized original 180 degrees to place its other half on platen, and then align it with the alignment mark ().

    

12. Check the message, and select Scan.

    The printer scans the other half of the oversized original and starts copying.

 To cancel copying, press the Stop  button.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

____________________________________________________________________________________________