1. Display the data to be printed, and press the [Print] key.

2. Use [​] to select "Set to print" and enter [2].

• Use the numeric keys or the arrow keys ([] / []) to enter the data. If you make a mistake, press the [Back Space] key to delete the entry.

• You can specify the number of prints from 1 to 10.

• This operation will print 2 pages of data twice.

3. Select "Tube ø3.0mm" with [] and press [], [] or the [Enter] key.

4. Select "Tube" with [] or [] and press the [Enter] key.

• The following print media can be selected with this product.
  Tube / Shrink tube / Label / Clear tube / Wrap Around / Flat tube

5. Use [] or [] to select "ø4.0mm," and then press the [Enter] key.

• You will then be returned to the printing preference display.

 In the following cases, the printer will not be able to detect that the tube has run out during printing, and may print on the transport roller. Make sure that the tube is long enough not to be lost during printing before starting printing.

• When the tube size is ø1.5 mm

• When the print media is set to "Clear Tube.

6. Use the arrow keys ([], [], [], []) to select "Preview," and press the [Enter] key.

• Check the print preview.

 No error message will be displayed even if the print data extends beyond the width (top and bottom) of the print media. It is recommended to refer to the preview to make sure that no characters are missing before printing.

7. Use [] to select "Print" and press the [Enter] key.

8. Use [] or [] to select "Print Head" and press the [Enter] key.

• Printing will be started.

 Check the head position of the loaded print media, then select "Cutter" or "Print head." Select "Print head" to print on the print media directly after loading it.

 If the media head position is set incorrectly, you may end up printing on the transport roller or have a big margin at the tip.

 After the media head position is set, the "Media Head Position" screen will not be displayed again in the following cases.

• When the cover is not opened.

• When the power is not turned off.

• When you do not change the type or size of the print media in the print settings.

• When the feed function and remove function are not used.

9. Removing the tube.

• When printing is finished, the tube will be automatically cut (Full cut). Also, a cut (Half cut) can be made between the tubes.

 After printing, remove the print media from the printer to prevent warping or deformation of the print media.

 Do not place any objects around the outlet of this product. If there is an object blocking the outlet, the tube or label tape may not be ejected straight and may be cut in a bent shape.

 Do not pull the tube or label tape forcibly during printing. Doing so may result in printing failure or malfunction.

1. Display the data to be printed, and press the [Print] key.

2. Use [] to select Preview, and then press the [Enter] key.

• The print preview will be displayed, flowing from right to left.

  • While pressing [] or [], the display will stop.

  • If you hold down [], the image will be displayed in fast forward.

  • Press [] to display the next page.

  • Press [Cancel] key to cancel preview display.

• When the preview display finishes, you will return to the printing preference display.

 When you specify the following print media, the line indicating the width of the print media is not shown in the preview.

• Tube (ø7 mm to ø10 mm), shrink tube (ø7 mm to ø10 mm), clear tube (ø7 mm to ø10 mm)

• Labels (12 mm)

 The preview may not exactly match the actual print result.

1. Display the data to be printed, and press the [Print] key.

2. Use [] or [] to select "Range", and use [] or [] to select "Specified."

3. Use [] or [] to select "Start page" and enter [2].

• Use the numeric keys or the arrow keys ([] / []) to enter the data.

4. Use [] or [] to select "End page" and enter [4].

• Use the numeric keys or the arrow keys ([] / []) to enter the data.

5. Use [] to select "Print" and print.

1. Display the page to be printed in Continuous Print.

2. Press the [Conti.] key.

3. Use [] or [] to select "Set count" and enter "3" (the number of times for Continuous Print).

• Use the numeric keys or the arrow keys ([]/[]) to enter the data.

• The value can be set in the range of 2 to 200 (times).

4. Press the [Enter] key.

• The display returns to the character input display.

• The number of times for Continuous Print can be checked on the display.

5. Print.