EOS R3: Using an Optional USB Power Adapter to Charge the Camera
| Article ID: ART182034 |
| |
Date published: 05/11/2023 |
| |
Date last updated: 08/31/2023 |
Description
Using an Optional USB Power Adapter to Charge the Camera
Solution
|
Using an Optional USB Power Adapter to Charge the Camera
Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E19 without removing it from the camera.
-
Connect the USB power adapter.
- With the camera power switch set to
 , insert the USB power adapter plug fully into the  terminal.
-
Connect the power cord.
- Connect the power cord to the USB power adapter and plug the other end into a power outlet.
- Charging begins, and the access lamp (1) is lit in green.
- [
 ] is displayed on the LCD panel.
- When charging is finished, the access lamp turns off.
Caution
- To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours.
- Charged batteries gradually lose their charge, even when they are not used.
- If the charging lamp fails to light up or a problem occurs during charging (shown by the access lamp blinking in green), unplug the power cord, reinsert the battery, and wait a few minutes before plugging it in again. If the problem persists, take the camera to the nearest Canon Service Center.
- The charging time required and the amount charged vary depending on ambient temperature and remaining capacity.
- For safety, charging in low temperatures takes longer.
- The camera cannot be powered with USB Power Adapter PD-E1.
- Some commercially available power adapters have been confirmed to charge and power the camera. For details, check the Canon website ().
|
SIMS Doc Id
1677016416258738145
