|
EOS R7: Selecting Cards for Recording/Playback
Article ID: ART182518 |
| |
Date published: 05/11/2023 |
| |
Date last updated: 09/13/2023 |
Description
Selecting Cards for Recording/Playback
Solution
Selecting Cards for Recording/Playback
Recording is possible when card [] or [] is in the camera (except under some conditions). With only one card inserted, there is no need to follow these steps.
With two cards inserted, you can select the recording method and card to use for recording and playback as follows.
Recording Method with Two Cards Inserted
-
Select [: Record func+card/folder sel.].
-
Set the recording method.
-
Rec options
Set the recording method for still photos.
-
Standard
Records still photos to the card selected in [ Record/play].
-
Auto switch card
Same as [Standard], but additionally, the camera switches to the other card when one card becomes full. At this time, a new folder is created.
-
Rec. separately
Enables you to set a specific image size for each card (). For each shot, a still photo is recorded to card and in your specified image quality.
Note that recording separately to and is not available for RAW images.
-
Rec. to multiple
For each shot, a still photo is recorded to card and in the same image quality.
Caution
- Maximum burst for [Rec. separately] is lower if you specify different image sizes for cards and ().
-
Rec options
Set the recording method for movies.
-
Standard
Records movies to the card selected in [ Record/play].
-
Auto switch card
Same as [Standard], but recording ends when the card becomes full. When you resume recording, the camera switches to the other card for recording. A new folder is created after switching cards.
-
Rec. to multiple
For each recording, the same movie is recorded to card and .
|
SIMS Doc Id
1679066371696998984
|