➤
Ask a Question

EOS R50 High-Speed Display Settings

Article ID: ART182847 | Date published: 05/11/2023 | Date last updated: 05/25/2023
 

Description

High-speed display that switches between each shot and the live image is available when shooting in [High-speed continuous shooting] drive mode and in a shutter mode other than electronic shutter.

Solution

 

High-Speed Display

High-speed display that switches between each shot and the live image is available when shooting in [High-speed continuous shooting] (high-speed continuous shooting) drive mode and in a shutter mode other than electronic shutter.

  1. Select [Shooting: High speed display].

  2. Select an option.

    • Select [Enable] for display that switches between each shot and the live image.

Caution

  • Images may waver or flicker during high-speed display. This occurs more often at high shutter speeds. However, this does not affect shooting results.
  • High-speed display is not performed for shutter speeds slower than 1/30 sec., aperture values higher than f/11, conditions that make autofocusing difficult, flash photography, or high ISO expansion. It may also stop as you are shooting.

  • High-speed display is not available in the following cases.

    • With [Shooting: OVF sim. view assist] set to [On]
    • With [Shooting: Display simulation] set to [Disable] or [Exposure only during DOF]
 

 

SIMS Doc Id

1679067671462320473

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments