Print the Network Settings (LAN Details) - GX1020
Article ID: ART184002 | Date published: 10/03/2023 | Date last updated: 10/03/2023
 

Description

This article shows how to print the network setting information (LAN details) of the MAXIFY GX1020.

Solution

Use the operation panel to print the printer's current network settings.

 The network settings printout contains important information about your network. Handle it with care.

  1. Check that printer is turned on.

  2. Load five or more sheets of A4 or Letter-sized plain paper.

  3. Select Setup icon (gear) (Setup) on HOME screen.

     If User management settings is enabled, the user selection screen is displayed before the HOME screen is displayed.

  4. Select Printer settings.

  5. Select LAN settings.

  6. Select Print details.

  7. Check the displayed message and select Yes.

  8. When the confirmation screen for printing passwords appears, select ON or OFF.

    The printer starts printing the network setting information.

The following information on the printer's network setting is printed out. (Some setting values are not displayed depending on the printer settings.)

Item Number

Item

Description

Setting

1

Product Information

Product information

1-1

Product Name

Product name

XXXXXXXX

1-2

ROM Version

ROM version

XXXXXXXX

1-3

Serial Number

Serial number

XXXXXXXX

2

Network Diagnostics

Network diagnostics

2-1

Diagnostic Result

Diagnostic result

XXXXXXXX

2-2

Result Codes

Result codes

XXXXXXXX

2-3

Result Code Details

Result code details

Information on the codes in this section can be found here.

3

Wireless LAN

Wireless LAN

Enable / Disable

3-2

Infrastructure

Infrastructure

Enable / Disable

3-2-1

Signal Strength

Signal strength

0 to 100 [%]

3-2-2

Link Quality

Link quality

0 to 100 [%]

3-2-3

Frequency

Frequency

2.4 / 5 [GHz]

3-2-4

MAC Address

MAC address

XX:XX:XX:XX:XX:XX

3-2-5

Connection

Connection status

Active / Inactive

3-2-6

SSID

SSID

Wireless LAN network name (SSID)

3-2-7

Channel

Channel

XXX (1 to 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165)

3-2-8

Encryption

Encryption method

none / TKIP / AES

3-2-10

Authentication

Authentication method

none / auto / open / shared / WPA-PSK / WPA2-PSK / WPA3-SAE / WPA-EAP / WPA2-EAP / WPA3-EAP

3-2-11

TCP / IPv4

TCP / IPv4

Enable

3-2-12

IP Address

IP address

XXX.XXX.XXX.XXX

3-2-13

Subnet Mask

Subnet mask

XXX.XXX.XXX.XXX

3-2-14

Default Gateway

Default gateway

XXX.XXX.XXX.XXX

3-2-15

TCP / IPv6

TCP / IPv6

Enable / Disable

3-2-16

Link Local Address

Link local address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-17

Link Local Prefix Length

Link local prefix length

XXX

3-2-18

Stateless Address1

Stateless address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-19

Stateless Prefix Length1

Stateless prefix length 1

XXX

3-2-20

Stateless Address2

Stateless address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-21

Stateless Prefix Length2

Stateless prefix length 2

XXX

3-2-22

Stateless Address3

Stateless address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-23

Stateless Prefix Length3

Stateless prefix length 3

XXX

3-2-24

Stateless Address4

Stateless address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-25

Stateless Prefix Length4

Stateless prefix length 4

XXX

3-2-26

Default Gateway1

Default gateway 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-27

Default Gateway2

Default gateway 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-28

Default Gateway3

Default gateway 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-29

Default Gateway4

Default gateway 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-33

IPsec

IPsec setting

Active / Inactive

3-2-34

Security Protocol

Security method

ESP / ESP & AH / AH / Blank (Not selected)

3-2-35

Wireless LAN DRX

Discontinuous reception (wireless LAN)

Enable / Disable

3-3

Wireless Direct / Access Point Mode

Operation mode for Wireless Direct

Enable / Disable

3-3-1

MAC Address

MAC address

XX:XX:XX:XX:XX:XX

3-3-2

Connection

Connection status

Active / Inactive

3-3-3

SSID

SSID

Wireless Direct network name (SSID)

3-3-4

Password

Password

Wireless Direct password

3-3-5

Channel

Channel

3,6,36,40

3-3-6

Encryption

Encryption method

AES

3-3-7

Authentication

Authentication method

WPA2-PSK

3-3-8

TCP / IPv4

TCP / IPv4

Enable

3-3-9

IP Address

IP address

XXX.XXX.XXX.XXX

3-3-10

Subnet Mask

Subnet mask

XXX.XXX.XXX.XXX

3-3-11

Default Gateway

Default gateway

XXX.XXX.XXX.XXX

3-3-12

TCP / IPv6

TCP / IPv6

Enable / Disable

3-3-13

Link Local Address

Link local address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-3-14

Link Local Prefix Length

Link local prefix length

XXX

3-3-15

IPsec

IPsec setting

Active / Inactive

3-3-16

Security Protocol

Security method

ESP / ESP & AH / AH / Blank (Not selected)

3-3-17

Wireless LAN DRX

Discontinuous reception (wireless direct)

Disable

3-3-18

Frequency

Wireless Direct frequency

2.4 / 5 [GHz]

4

Wired LAN

Wired LAN

Enable / Disable

4-1

MAC Address

MAC address

XX:XX:XX:XX:XX:XX

4-2

Connection

Wired LAN status

Active / Inactive

4-3

TCP / IPv4

TCP / IPv4

Enable

4-4

IP Address

IP address

XXX.XXX.XXX.XXX

4-5

Subnet Mask

Subnet mask

XXX.XXX.XXX.XXX

4-6

Default Gateway

Default gateway

XXX.XXX.XXX.XXX

4-7

TCP / IPv6

TCP / IPv6

Enable / Disable

4-8

Link Local Address

Link local address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-9

Link Local Prefix Length

Link local prefix length

XXX

4-10

Stateless Address1

Stateless address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-11

Stateless Prefix Length1

Stateless prefix length 1

XXX

4-12

Stateless Address2

Stateless address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-13

Stateless Prefix Length2

Stateless prefix length 2

XXX

4-14

Stateless Address3

Stateless address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-15

Stateless Prefix Length3

Stateless prefix length 3

XXX

4-16

Stateless Address4

Stateless address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-17

Stateless Prefix Length4

Stateless prefix length 4

XXX

4-18

Default Gateway1

Default gateway 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-19

Default Gateway2

Default gateway 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-20

Default Gateway3

Default gateway 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-21

Default Gateway4

Default gateway 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-25

IPsec

IPsec setting

Active / Inactive

4-26

Security Protocol

Security method

ESP / ESP & AH / AH / Blank (Not selected)

4-27

Wired LAN DRX

Discontinuous reception (wired LAN)

Enable / Disable

5

Other Settings

Other settings

5-1

Printer Name

Printer name

Printer name

5-2

Wireless Direct DevName

Device name for wireless direct

Device name for wireless direct

5-4

WSD Printing

WSD printing setting

Enable / Disable

5-5

WSD Timeout

Timeout

1 / 5 / 10 / 15 / 20 [min]

5-6

LPD Printing

LPD printing setting

Enable / Disable

5-7

RAW Printing

RAW printing setting

Enable / Disable

5-9

Bonjour

Bonjour setting

Enable / Disable

5-10

Bonjour Service Name

Bonjour service name

Bonjour service name

5-11

LLMNR

LLMNR setting

Enable / Disable

5-12

SNMP

SNMP setting

Enable / Disable

5-14

DNS Server

Obtain DNS server address automatically

Auto / Manual

5-15

Primary Server

Primary server address

XXX.XXX.XXX.XXX

5-16

Secondary Server

Secondary server address

XXX.XXX.XXX.XXX

5-17

Proxy Server

Proxy server setting

Enable / Disable

5-18

Proxy Address

Proxy address

XXXXXXXXXXXXXXXXXXXX

5-19

Proxy Port

Proxy port specification

1 to 65535

5-20

Cert. Fingerprt(SHA-1)

Certificate fingerprint(SHA-1)

xxxxxxxx xxxxxxxx xxxxxxxx

xxxxxxxx xxxxxxxx

5-21

Cert. Fingerprt(SHA-256)

Certificate fingerprint(SHA-256)

xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx

xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx

7

Web Services

Web Services

7-1

Unsent Usage Logs

Number of unsent usage logs

0 to 200

7-2

Usage Log Last Sent

Last date when usage log was sent

XXXXXXXX

7-3

Web Service Status

Registration status

Not set / Disabled / Registration pending / Registered

7-4

Log Transmission Status

Transmission result

Not activated / Processing / Server error / Connection error / Timeout error / Error / Awaiting server response / Active

9

Security policy

Security policy status

9-1

Security administrator password

Security administrator password

Enable / Disable

9-2

Interface

Interface function

9-2-1

Wi-Fi policy

Wireless connection policy

 

Prohibit use of direct connection

Prohibit use of direct connection

Enable / Disable

 

Prohibit use of wireless LAN (Wi-Fi)

Prohibit use of wireless LAN

Enable / Disable

9-2-2

USB policy

USB connection policy

 

Prohibit use of USB connection

Prohibit use of USB device

Enable / Disable

 

Prohibit use of external USB devices

Prohibit use as USB storage device

Enable / Disable

9-3

Network

Network function

9-3-1

Communication policy

Communication operational policy

 

Always verify signatures for SMB / WebDAV server functions

Always verify signatures when using SMB / WebDAV server functions

Enable / Disable

 

Always verify server certificate when using TLS

Always verify server certificate when using TLS

Enable / Disable

 

Prohibit cleartext authentication for server functions

Prohibit cleartext authentication for server functions

Enable / Disable

 

Prohibit use of SNMPv1

Prohibit use of SNMPv1

Enable / Disable

9-3-2

Port usage policy

Port Usage Policy

 

Restrict LPD port

Restrict LPD port

Enable / Disable

 

Restrict RAW port

Restrict RAW port

Enable / Disable

 

Restrict FTP port

Restrict FTP port

Enable / Disable

 

Restrict WSD port

Restrict WSD port

Enable / Disable

 

Restrict BMLinkS port

Restrict BMLinkS port

Enable / Disable

 

Restrict IPP port

Restrict IPP port

Enable / Disable

 

Restrict SMB port

Restrict SMB port

Enable / Disable

 

Restrict SMTP port

Restrict SMTP port

Enable / Disable

 

Restrict dedicated port

Restrict dedicated port

Enable / Disable

 

Restrict remote operation's software port

Restrict remote operation's software port

Enable / Disable

 

Restrict SIP (IP Fax) port

Restrict SIP (IP Fax) port

Enable / Disable

 

Restrict mDNS port

Restrict mDNS port

Enable / Disable

 

Restrict SLP port

Restrict SLP port

Enable / Disable

 

Restrict SNMP port

Restrict SNMP port

Enable / Disable

9-4

Authentication

Authentication function

9-4-1

Authentication policy

Authentication operational policy

 

Prohibit guest users from using the printer

Prohibit guest users from using the device

Enable / Disable

 

Force auto logout

Force auto logout

Enable / Disable

 

Logout period

Time Until Logout

xx sec

9-4-2

Pwd operation policy

Password operational policy

 

Prohibit caching of password for external servers

Prohibit caching of password for external servers

Enable / Disable

 

Display warning when default password is in use

Display warning when default password is in use

Enable / Disable

 

Prohibit use of default password for remote access

Prohibit use of default password for remote access

Enable / Disable

9-4-3

Password settings policy

Password settings policy

 

Minimum number of characters for password

Set minimum number of characters for password

Enable / Disable

 

characters (1 - 32)

Set minimum number of characters

1~32 (characters)

 

Password validity period

Set password validity period

Enable / Disable

 

days (1 - 180)

Validity period for password

1-180 days

 

Prohibit use of 3 or more identical consecutive characters

Prohibit use of 3 or more identical consecutive characters

Enable / Disable

 

Require use of at least 1 uppercase character

Force use of at least 1 uppercase character

Enable / Disable

 

Require use of at least 1 lowercase character

Force use of at least 1 lowercase character

Enable / Disable

 

Require use of at least 1 number

Force use of at least 1 digit

Enable / Disable

 

Require use of at least 1 symbol

Force use of at least 1 symbol

Enable / Disable

9-4-4

Lockout policy

Lockout Policy

 

Enable lockout

Enable lockout

Enable / Disable

 

Lockout threshold (times)

Lockout Threshold

1-10 time

 

Lockout period (minutes)

Lockout Period

1-60 min

9-5

Key / Certificate

Key / Certificate function

 

Prohibit use of weak encryption

Prohibit use of weak encryption

Enable / Disable

 

Prohibit use of key / certificates with weak encryption

Prohibit use of key / certificate with weak encryption

Enable / Disable

 

Use TPM to store password and key

Use TPM to store password and key

Enable / Disable

9-6

Log

Log function

 

Force recording of audit log

Force recording of audit log

Enable / Disable

 

Require SNTP settings

Force SNTP settings

Enable / Disable

 

Server name

SNTP server name setting

URL

9-7

Job

Job function

9-7-1

Printing policy

Printing Policy

 

Prohibit immediate printing of received jobs

Prohibit immediate printing of received jobs

Enable / Disable

9-7-2

Send / Receive policy

Sending / Receiving Policy

 

Allow sending only to registered addresses

Allow sending only to registered addresses

Enable / Disable

 

Force confirmation of fax number

Force confirmation of fax number

Enable / Disable

 

Prohibit auto forwarding

Prohibit auto forwarding

Enable / Disable

9-7-3

Storage

Storage policy

 

Force complete deletion of data

Force complete deletion of data

Enable / Disable

("XX" represents alphanumeric characters.)

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________