Make sure that the printer is turned off, connect one end of supplied telephone line cable to the telephone line jack near the "LINE" mark of the printer, then connect the other end to the telephone line jack on the wall or to the telephone line jack of the xDSL splitter.

When you connect the telephone to the printer, make sure that the printer is turned off, connect one end of the modular cable to the external device jack near the "EXT." mark of the printer, then connect the other end to the telephone line jack of the telephone.

 Be sure to connect the telephone line before the printer is turned on.

If you connect the telephone line when the printer is turned on, turn the printer off and unplug the power cord. Wait for 1 minute then connect the telephone line and power plug.

 The position of the telephone line jack and external device jack can be found on the rear of the printer.

 Before connecting a telephone or answering machine, remove the Telephone connector cap.

These are examples and could not be guaranteed to suit every connecting condition. For details, refer to the instruction manual supplied with the network device (control devices such as an xDSL (Digital Subscriber Line) modem or terminal adapter) you are connecting to this printer.

 xDSL is the generic term for the high speed digital communication technology with telephone line such as ADSL / HDSL / SDSL / VDSL.

• Connecting to an Internet Telephone

  

  1. Digital Subscriber Line
  2. xDSL modem (splitter may not be built-in to the modem)
  3. Broadband router compatible with Internet Telephone
  4. Computer
  5. Telephone or answering machine
  6. WAN (Wide Area Network) port
  7. LAN (Local Area Network) port
  8. TEL port
  9. LINE port

* Port configurations and names may vary depending on the product.

 When connecting to the xDSL line, select the same line type as you are subscribing to in Telephone line type.

• Connecting to an xDSL

  

  1. Analog Subscriber Line
  2. xDSL modem (splitter may not be built-in to the modem)
  3. Computer
  4. Telephone or answering machine

 When the splitter is not built-in to the xDSL modem, do not branch the telephone line before the splitter (wall side). And also, do not connect splitters in parallel. The printer may not be able to operate properly.

 When connecting to the xDSL line, select the same line type as you are subscribing to in Telephone line type.

• Connecting to an ISDN Line

  For details on ISDN (Integrated Service Digital Network) connection and settings, refer to the manuals supplied with your terminal adapter or dial-up router.