Changing the Printer Operation Mode (Windows) - TS3720

Article ID: ART184645 | Date published: 04/01/2024 | Date last updated: 04/03/2024


This article explains how to use a Windows PC to change how the PIXMA TS3720 operates.


If necessary, switch between various modes of printer operation.

Custom Settings

  1. Open the Canon IJ Printer Assistant Tool.

  2. Check that the printer is on and then click Custom Settings.

    The Custom Settings dialog box opens.

     If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status. If this happens, click OK to display the most recent settings specified on your computer.

  3. Adjust the following settings as desired:

    Align heads manually

    Usually, the Print Head Alignment function in the Canon IJ Printer Assistant Tool is set to automatic head alignment, but you can change it to manual head alignment.
    If the printing results of automatic Print Head Alignment are not satisfactory, perform manual head alignment.
    Check this check box to perform the manual head alignment. Uncheck this check box to perform the automatic head alignment.

    Rotate 90 degrees left when orientation is [Landscape]
    On the Page Setup tab, you can change the rotation direction of the Landscape in Orientation.
    To rotate the print data 90 degrees to the left during printing, select this item. To rotate the print data 90 degrees to the right during printing, clear this item.

     Don't change this setting while the print job is displayed in the print wait list. Otherwise, characters may be omitted or the layout may become corrupt.

    Do not detect mismatched paper settings when printing from a computer

    When printing documents from your computer, the paper loaded in the printer and the paper size setting on the printer driver don't match, this setting disables the message display and allows you to continue printing.
    To disable detection of paper setting mismatches, select this check box.

    Ink Drying Wait Time

    You can set the length of the printer rest time until printing of the next page begins. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time.
    If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
    Reducing the ink drying wait time speeds up printing.

  4. Click OK and when the confirmation message appears, click OK.

    The printer will operate with the specified settings.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments