Understand Symbols and Icons on the LCD - TS3720 / TS3722
Article ID: ART184672 | Date published: 04/01/2024 | Date last updated: 04/03/2024
 

Description

Learn about the various symbols and icons that can be shown on the screen of the PIXMA TS3720 / TS3722.

Solution

Before Starting

 Information regarding error codes that may flash on the LCD (such as E02) can be found here.
 

Indication of LCD

The number of copies, maintenance code, error code or various icons is displayed on the LCD.

LCD with various segments lit for illustration purposes

A: Network status

Displays the current network status.

Wi-Fi and Wireless Direct are enabled Wi-Fi and Wireless Direct are enabled.

Wi-Fi is enabled Wi-Fi is enabled.

Wireless Direct is enabled Wireless Direct is enabled.

When the Wi-Fi is enabled icon and the Wireless Direct is enabled icon aren't displayed, Wi-Fi and Wireless Direct are disabled.

B: Current network status

Displays the current network status.

The icon differs depending on the network of use or the network status.

High signal strength (Signal strength: 81 % or more): You can use the printer over a Wi-Fi without any problems.

Medium signal strength (Signal strength: 51 % or more): The problem such as the printer cannot print may occur according to the network status. We recommend placing the printer near the wireless router.

Low signal strength (Signal strength: 50 % or less): The problem such as the printer cannot print may occur. Place the printer near the wireless router.

Printer not connected to a wireless router Wi-Fi is enabled but the printer is not connected to the wireless router.

C: Segment display

Displays the number of copies, maintenance code, or error code.

The number from 0 to 19 or alphabet is displayed.

D: Paper status

Appears during paper loaded on the rear tray. This icon also flashes while you select the paper size after pressing the Paper Select button.

* This icon does not appear if the paper mismatch detection function is disable.

E: Paper size

Displays the current paper size. The paper size also flashes while you select the paper size after pressing the Paper Select button.

F: Setup

Appears by pressing the Setup  button. During this icon, select a menu to perform printer maintenance and to change printer settings.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________