PIXMA TS3720 WPS Push Button Setup
Article ID: ART184700 | Date published: 04/04/2024 | Date last updated: 04/04/2024


Setup the Wireless Connection using a WPS-compatible wireless router


WPS Connection

Follow the procedure below to set up the network connection using Wi-fi Protected Setup (WPS)

  1. Make sure the WPS button on the wireless router is ready to be pressed.

  2. Press and hold the Wireless select button (A) on the printer, and then release the button when Network status icon (B) flashes.

    figure: Press and hold the Wireless select button and the Network status icon flashes

  3. Press and hold the WPS button on the wireless router within 2 minutes.

     For more on pressing the WPS button, see the wireless router manual.

  4. When connection to the wireless router is complete, Network status icon and Signal Strength icon (C) will be lit.

    figure: The Network status icon and Signal Strength icon are lit

    If the Alarm lamp lights up, see "Troubleshooting."

    The network connection setup is now complete.

    If performing setup with software, return to the software and proceed with the installation.


    Click Setup icon in the taskbar, follow the on-screen instructions to proceed with setup.



    Click Setup icon in the Dock, follow the on-screen instructions to proceed with setup.


If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum