The procedure for setting paper source is as follows:
You can also set the paper source on the Basic Settings tab.
-
Open the printer driver setup window.
-
Select the type of paper loaded in the printer from the Media Type list on the Media/Quality tab.
-
From the Paper Source list, select the paper source that matches your purpose.
-
Automatically Select
-
Based on the paper settings in the printer driver and the paper information registered on the printer, the printer automatically determines the paper source and feeds paper.
-
Rear Tray
-
Paper is always fed from the rear tray.
-
Cassette
-
Paper is always fed from the cassette.
Plain paper that is not Letter 8.5"x11" 22x28cm, A5, A4, or B5 and paper types other than plain paper cannot be fed from the cassette.
-
Rear Flat Tray
-
Paper is always supplied from the rear flat tray.
This source is only available if Paperboard is the selected media type.
-
Click OK.
When you print, the printer uses the specified paper source to print the data.
If the paper settings in the printer driver differ from the paper information registered on the printer, an error may occur.
For details about the paper information to be registered on the printer, see the following:
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________
