Duplex Printing with the PRO-200/PRO-300

Article ID: ART184742 | Date published: 05/23/2024 | Date last updated: 05/23/2024


How to print using manual duplex with the PRO-200 and PRO-300 printers. Note: Manual duplex is not available on macOS due to limitations of macOS.


Duplex Printing

When Business Document or Paper Saving is selected for Commonly Used Settings on the Quick Setup tab, duplex printing can also be set by using Additional Features.

  1. Open the printer driver setup window

  2. Set duplex printing

    Check the Duplex Printing (Manual) check box on the Page Setup tab.

    figure:Duplex Printing (Manual) check box on the Page Setup tab
  3. Select the layout

    Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list.

  4. Specify the side to be stapled

    The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To change the setting, select another stapling side from the list.

  5. Set the margin width

    If necessary, click Specify Margin... and set the margin width, and then click OK.

  6. Complete the setup

    Click OK on the Page Setup tab.
    When you perform print, the document is first printed on one side of a sheet of paper. After one side is printed, reload the paper correctly according to the message.
    Then click Start Printing to print the opposite side.


  • When a media type other than Plain Paper is selected from Media Type on the Main tab, Duplex Printing (Manual) appears grayed out and is unavailable.
  • When Borderless, Tiling/Poster or Booklet is selected from the Page Layout list, Duplex Printing (Manual) and Stapling Side appear grayed out and are unavailable.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments