PIXMA / MAXIFY Products: Windows 10 on ARM Computers
Article ID: FAQ100604 | Date published: 07/19/2021 | Date last updated: 07/19/2021
 

Answer

The following models are compatible with Windows 10 on ARM-based computers:

Printers   Multifunction Printers   FAX
iB4020   G3200 MG3620 MP230 MX512   JX210P
iB4120   G3210 MG4120 MP250 MX522    
iP100   G4200 MG4220 MP270 MX532    
iP110   G4210 MG5120 MP280 MX712    
iP270x   MB2020 MG5220 MP490 MX722    
iP2820   MB2120 MG5320 MP495 MX870    
iP4700   MB2320 MG542X MP550 MX882    
iP4820   MB2720 MG552X MP560 MX892    
iP4920   MB5020 MG5620 MP640 MX922    
iP7220   MB5120 MG572X MX320 TS5020    
iP8720   MB5320 MG6120 MX340 TS6020    
iX6520   MB5420 MG6220 MX350 TS8020    
iX6820   MG2120 MG6320 MX360 TS9000    
iX7000   MG2220 MG6420 MX372      
PRO-1   MG2420 MG662X MX392 Scanners    
PRO-10   MG252X MG682X MX410 5600F    
PRO-100   MG292x MG7120 MX420 9000F    
Pro9000 MkII   MG302X MG7520 MX43X 9000F MkII    
Pro9500 MkII   MG312X MG7720 MX45X LiDE 110    
TS202   MG322X MG8120 MX47X LiDE 210    
TS302   MG352X MG8220 MX49X LiDE 700F    

 

If you want to use your product via USB with a Windows 10 device running on an ARM-based processor, simply plug your device into an available USB port.  A driver will be installed automatically.

If you want to use a printer across a network:

  1. Open the Control Panel by holding the Windows key  and pressing the letter R.  In the Run window, type "control panel" (without quotation marks) and click OK.

  2. Click Devices and Printers.

  3. Click Add a Printer.

  4. In the new window that appears, click on your printer and then click Next.

  5. A driver will be installed.  When this process has finished, click Finish.

[MYCANONACCOUNT}