skip to main text

Front View

(1) operation panel

Use to change the settings of the printer or to operate it.

(2) ADF (Auto Document Feeder)

Load a document here. The documents loaded in the document tray are scanned automatically one sheet at a time.

(3) document feeder cover
Open when clearing jammed documents.
(4) document guide
Adjust this guide to match the width of document in the ADF.
(5) paper support
Extend to load paper in the rear tray.
(6) rear tray cover
Open to load paper in the rear tray.
(7) feed slot cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

(8) rear tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.

(9) paper guides
Align with both sides of the paper stack.
(10) document tray
Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.
(11) document output slot
Documents scanned from the ADF are delivered here.
(12) document cover
Open to load an original on the platen glass.
(13) cassette

Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.

(14) paper guides
Align with right/left/front sides of the paper stack.
(15) cassette cover
Detach to load paper in the cassette.
(16) paper output tray
Printed paper is ejected. Pull out it before printing.
(17) paper output support
Extend to support ejected paper.
(18) output tray extension
Open to support ejected paper.
(19) card slot

Insert a memory card.

(20) Access lamp

Lights or flashes to indicate the memory card status.

(21) platen glass
Load an original here.