skip to main text

Changing Settings from Operation Panel

This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example.

  1. Make sure printer is turned on.

  2. Select Setup on the HOME screen.

  3. Select Settings.

  4. Select Device settings.

    The Device settings screen is displayed.

  5. Select a setting item to adjust.

    figure: Touch screen

    The setting screen for the selected item is displayed.

  6. Select a setting item.

    figure: Touch screen
  7. Select a setting to specify.

    figure: Touch screen

For more on setting items on the operation panel: