skip to main text

Printing with Easy Setup

This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.

Printing with Easy Setup

  1. Check that the printer is turned on

  2. Load paper on the printer

  3. Open the printer driver setup window

  4. Select a frequently used profile

    In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
    When you select a printing profile, the Additional Features, Media Type, and Printer Paper Size settings are automatically switched to the values that were preset.

    figure:Commonly Used Settings on the Quick Setup tab
  5. Select the print quality

    For Print Quality, select High or Standard according to your purpose.

    figure:Print Quality on the Quick Setup tab


    • The print quality settings that can be selected may differ depending on a printing profile.
  6. Complete the setup

    Click OK.
    When you execute print, the document is printed with settings that match your purpose.

    figure:OK on the Quick Setup tab


  • When you select the Always Print with Current Settings check box, all settings specified on the Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from the next time as well.
  • In the Commonly Used Settings window, click Save... to register the specified settings.


Checking Printer Settings and Applying Settings to Printer Driver

  1. Open printer driver setup window

  2. Click Printer Media Information... on Quick Setup tab
    The Printer Media Information dialog box appears.

  3. Select Paper Source

    From Paper Source, check the setting or select a new paper source.
    The current printer settings appear in Media Type and Page Size.

  4. Apply settings

    To apply the printer settings to the printer driver, click Set.


    • If the media type on the printer is set to Hagaki, Ink Jet Hagaki, or Hagaki K or if the output paper size on the printer is set to 2L/5"x7"(13x18), click Set to display the dialog box.
      Select the media type and paper size that matches your purpose, and then click OK.
    • If the media type and the output paper size are not set on the printer, Set will be grayed out and cannot be clicked.
    • If communication with the printer is disabled, the Printer Media Information... does not appear or printer media information from the printer cannot be obtained.