Ask a Question

Cleaning the Transfer Belt - MF750 Series

Article ID: ART184741 | Date published: 05/17/2024 | Date last updated: 05/17/2024
 

Description

If the printout is smudged, the transfer belt (ITB) inside the machine may be dirty. Clean the transfer belt using the procedure below. The transfer belt cannot be cleaned when data is waiting to be printed.

The following models are covered in this Article.
  • MF753Cdw
  • MF751Cdw

Solution

1, On the operation panel, press [Menu] in the [Home] screen.

2. Press [Adjustment/Maintenance] -> [ Maintenance] -> [Clean ITB].
The [Clean ITB] screen is displayed.

3. Press [Start].
Cleaning is performed
When cleaning is completed, the message [Finished.] appears, and then the [Maintenance] screen is displayed.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments