Salesforce

How to Print Out the LAN details (Network Setting Information) - MG3220 / MG3222

Printable View
« Go Back

Information

 
TitleHow to Print Out the LAN details (Network Setting Information) - MG3220 / MG3222
URL NameART137734
Description
This article explains how to print a Network Configuration Page for the PIXMA MG3220 and MG3222.  An example of this page is attached to this article.
Solution

You can print out the network settings of the machine such as its IP address and SSID.

Important:  This print out contains valuable information about your computer. Handle it with care.

Note: The steps listed below are specific to the MG3220 and MG3222 printers.  For instructions for other models, click here

  1. Make sure that the machine is turned on.
     

  2. Load a sheet of A4 or Letter-sized plain paper.

    Loading Paper
     

  3. Press the (Maintenance) button repeatedly until the LED displays as follows.

    figure: LED
     

  4. Press the Color button or the Black button.

    The machine starts printing the network setting information.
    The following information on the machine's network setting is printed out.

    Item

    Explanations of the item

    Setting

    Wireless LAN

    Wireless LAN

    Enable/Disable

    Connection

    Status of the Wireless LAN

    Active/Inactive

    MAC Address

    MAC Address

    XX:XX:XX:XX:XX:XX

    SSID

    SSID

    SSID of the wireless LAN

    Communication Mode

    Communication Mode

    Infrastructure

    Channel

    Channel

    XX (1 to 13)

    Encryption

    Method of the Encryption

    none/WEP/TKIP/AES

    WEP Key Length

    WEP Key Length

    Inactive/128/64

    Authentication

    Method of the Authentication

    none/auto/open/shared/WPA-PSK/WPA2-PSK

    Signal Strength

    Signal Strength

    0 to 100 [%]

    TCP/IP Version

    TCP/IP Version

    IPv4 & IPv6/IPv4

    IPv4 IP Address

    Selected IP Address (IPv4)

    XXX.XXX.XXX.XXX

    IPv4 Default Gateway

    Default Gateway (IPv4)

    XXX.XXX.XXX.XXX

    Subnet Mask

    Subnet Mask

    XXX.XXX.XXX.XXX

    IPv6 IP Address *1

    Selected IP Address (IPv6)

    XXXX.XXXX.XXXX.XXXX
    XXXX.XXXX.XXXX.XXXX

    IPv6 Default Gateway *1

    Default Gateway (IPv6)

    XXXX.XXXX.XXXX.XXXX
    XXXX.XXXX.XXXX.XXXX

    Subnet Prefix Length*1

    Subnet Prefix Length

    XXX

    IPsec*2

    IPsec setting

    Active

    Security Protocol*2

    Method of the Security Protocol

    ESP/ESP & AH/AH

    WPS PIN CODE

    WPS PIN code

    XXXXXXXX

    Wireless LAN DRX

    Discontinuous reception (wireless LAN)

    Enable/Disable

    Other Settings

    Other settings

    -

    Printer Name

    Printer name

    Printer name (Up to 15 characters)

    WSD

    WSD setting

    Enable/Disable

    WSD Timeout

    Timeout

    1/5/10/15/20 [min]

    LPR Protocol

    LPR protocol setting

    Enable/Disable

    Bonjour

    Bonjour setting

    Enable/Disable

    Bonjour Service Name

    Bonjour service name

    Bonjour service name (Up to 52 characters)

    IP Address Filtering

    IP Address Filtering

    Enable/Disable

    ("XX" represents alphanumeric characters.)

    *1 Only when IPv6 is activated, the status of the network is printed.

    *2 Only IPv6 and the IP sec setting are activated, the status of the network is printed.

Page top

Powered by