Salesforce

Printing the LAN details MX350 / MX870

« Go Back

Information

 
TitlePrinting the LAN details MX350 / MX870
URL NameART137880
Description
This article explains how to print the LAN details page for the MX350 and MX870.  An example of this page is attached to this article.
Solution

Printing Out Network Setting Information

You can print out the network settings of the machine such as its IP address and SSID.
 

Note: The steps listed below are specific to the MX350 and MX870 printers.  For instructions for other models, click here

  1. Make sure that the machine is turned on. Load a sheet of A4 or Letter-sized plain paper.
     

  2. Press the Setup button.
     

  3. Select Device settings, then press the OK button.

  4. Use the UP DOWN button to select LAN settings, then press the OK button.

  5. Use the UP DOWN button to select Confirm LAN settings, then press the OK button.

  6. Use the UP DOWN button to select Print LAN details, then press the OK button to confirm the selection.
     

  7. Use the UP DOWN button to select Yes, then press the OK button to start printing.

    The machine starts printing the network setting information.

    The following information on the machine's network (WLAN or LAN) settings is printed out.


    WLAN setting list

     

    Items

    Setting (IPv4)

    Setting (IPv6)

    Link Status

    Active/Inactive

    Active/Inactive

    SSID

    XXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXX

    XXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXX

    Communication mode

    Infrastructure

    Infrastructure

    Channel

    XX

    XX

    Wireless LAN security

    Disable/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)

    Disable/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)

    IP address

    XXX. XXX. XXX. XXX

    XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX

    Subnet mask

    XXX. XXX. XXX. XXX

    -

    Subnet prefix length

    -

    XXX

    Default gateway

    XXX. XXX. XXX. XXX

    XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX

    MAC address

    XX:XX:XX:XX:XX:XX

    XX:XX:XX:XX:XX:XX

    IPsec settings

    -

    Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable

    Pre-shared key

    -

    XXXXXXXXXXX

    Printer name

    XXXXXXXXXXXXXXX

    XXXXXXXXXXXXXXX

    Bonjour service name

    Canon MX870 series _XXXXXXXXXXXX, or

    Canon MX350 series _XXXXXXXXXXXX

    Canon MX870 series _XXXXXXXXXXXX , or

    Canon MX350 series _XXXXXXXXXXXX



    LAN setting list
     

    Items

    Setting (IPv4)

    Setting (IPv6)

    Link Status

    Active/Inactive

    Active/Inactive

    IP address

    XXX. XXX. XXX. XXX

    XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX

    Subnet mask

    XXX. XXX. XXX. XXX

    -

    Subnet prefix length

    -

    XXX

    Default gateway

    XXX. XXX. XXX. XXX

    XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX

    MAC address

    XX:XX:XX:XX:XX:XX

    XX:XX:XX:XX:XX:XX

    IPsec settings

    -

    Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable

    Pre-shared key

    -

    XXXXXXXXXXX

    Printer name

    XXXXXXXXXXXXXXX

    XXXXXXXXXXXXXXX

    Bonjour service name

    Canon MX870 series _XXXXXXXXXXXX or

    Canon MX350 series _XXXXXXXXXXXX

    Canon MX870 series _XXXXXXXXXXXX

    Canon MX350 series _XXXXXXXXXXXX

Page top


Powered by