Salesforce

Printing the Network Information (LAN Details) - MG4220

Printable View
« Go Back

Information

 
TitlePrinting the Network Information (LAN Details) - MG4220
URL NameART143851
Description
This article explains how to print a Network Configuration Page for the PIXMA MG4220.  An example of this page is attached to this article.
Solution

Note: The steps listed below are specific to the MG4220.  For instructions for other models, click here

  1. Make sure that the machine is turned on.
     

  2. Load a sheet of A4 or Letter-sized plain paper.
     

  1. Select   Setup on the HOME screen.
     

  2. Select Device settings, then use the OK button to confirm the selection.

    The Device settings screen is displayed.
     

  3. Use the UP DOWN button to select LAN settings, then press the OK button to confirm the selection.
     

  4. Use the UP DOWN button to select Confirm LAN settings, then press the OK button to confirm the selection.
     

  5. Use the UP DOWN button to select Print LAN details, then press the OK button to confirm the selection.
     

  6. Use the UP DOWN button to select Yes, then press the OK button to start printing.

    The machine starts printing the network setting information.
Powered by