Printing the Network Information - iB4020

This article explains how to print out a Network Configuration Page for the MAXIFY iB4020.

An example of this page is attached to this article.

 The steps listed below are specific to the iB4020.  For instructions for other models, click here.

To print a Network Configuration Page for your MAXIFY iB4020, follow these steps.

1. Press the Setup   button.

2. Press the right arrow until Device settings appears.  Then, press OK.

3. Press the right arrow until LAN settings appears.  Then, press OK.

4. Press the right arrow until Print LAN details appears.  Then, press OK.

The network configuration page will print.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

____________________________________________________________________________________________

iB4020 Page